This website uses cookies to offer you certain services and to enhance your user experience. By continuing to use our website, you consent to the usage of cookies as described in our Cookie Policy.

Digital Systems
 
Home...
Digital Systems...
Tools...

Lighting Designer


Design Your Light!
OSRAM Lighting Designer is a tool to identify the right combination of LED modules and driver for your luminaire project. With just a few clicks you find the OSRAM lighting system of your choice. Please enter your fixture requirements and press Search.
Browser requirements: For best performance please use Firefox, Chrome, Safari or Edge browser.

LED module

Fixture Requirements
 
No results found for these criteria.
Please select a LED module
OSRAM LED module EAN CCT (K) CRI Nominal Flux (lm)² Length (mm) Width (mm) Calculated System Efficacy (lm/W)³

Filter results

clear filters
¹ Theoretic Driver Efficiency: Used for initial calculation. The effective Driver Efficiency results on many different factors.
² Nominal Flux (lm) can be over-driven
³ The calculated System Efficacy is based on the Theoretic Driver Efficiency and Required System Luminous Flux (lm)

LED driver

Technical specifications

mA
V
W

Select LED driver

Please select a LED driver
OSRAM LED driver Current out (mA) Voltage out (V) Power out (W) Interface Dimmable IP Application

Filter results

clear filter

Summary

Summary

LED module
OSRAM LED module
EAN
CCT (K)
CRI
Nominal Flux (lm)²
Lumen Max Current (lm)
Length (mm)
Width (mm)
Module Type
Product Specification
LED driver
Ordering Abbreviation
EAN
Current out (mA)
Voltage out (V)
Power out (W)
Application
Interface
Dimmable
IP
Product Specification
Fixture
No. of Modules
Isolation
Required System Luminous Flux (lm)
Optical Efficiency (%)
Theoretic Driver Efficiency (%)¹
Required min. System Efficacy (lm/W)
Calculated System Efficacy (lm/W)³
Power out (W)
Voltage out (V)
Current out (mA)
¹ Theoretic Driver Efficiency: Used for initial calculation. The effective Driver Efficiency results on many different factors.
³ The calculated System Efficacy is based on the Theoretic Driver Efficiency and Required System Luminous Flux (lm)

Disclaimer: OSRAM is offering the Lighting Designer tool to be used by its customers for a preliminary evaluation in order to find suitable combinations of LED-Drivers and LED-Modules. If and when using the Lighting Designer tool, customers accept the following terms and conditions: The Lighting Designer is made available solely for the above described purpose. The customer shall not be exempt from carrying out a solid engineering-effort process to meet his dedicated product requirements. OSRAM makes no representation that the Lighting Designer provides any particular functionality, or will meet the requirements of a particular user application or a particular purpose. OSRAM does not warrant that the combination results are fully verified, tested, meet legal standards and/or product safety requirements. Any result, information and calculation provided by the Lighting Designer are not legally binding and are always overridden by the product respective official documentation. OSRAM shall not be liable for any damages, including, without limitation, direct, indirect, incidental, special, reliance, or consequential damages arising from or in connection with the use of the Lighting Designer in any manner whatsoever. The foregoing states the entire liability of OSRAM with respect to the Lighting Designer.
Lorem Ipsum

System Solution Support

You have feedback or technical questions about our products or system solutions?
Please contact your local sales representative or
our electronics distribution network for orders
Imprint
Terms of Use
Privacy Policy
Cookie Policy
Contact
Get our free Newsletter
Newsletter archive
© 2020, OSRAM GmbH. All rights reserved.