Digital Systems
 

BackLED M Plus HO G1

The IP66-protected and robustly encapsulated modules of BackLED M Plus HO G1 are joined by flexible cables, have a long lifespan and module efficacy of up to 101 lm / W. This makes BackLED M Plus HO G1 ideal for use in signage and illuminated advertising, including outside (if you install it in enclosed light boxes or channel letters). You can also use BackLED M Plus HO G1 for the LED backlighting of small and / or flat channel letters and single or double-sided light boxes. With several options for quick and easy mounting, uniform illumination at high LED pitches (thanks to Square Lens technology) and consistent white light (SDCM < 3) BackLED M Plus HO G1 gives you significantly better application efficiency than systems without lenses, is ENEC certified and comes with a 5 year guarantee.

BackLED M Plus HO G1

Product data sheet
Product family features
  • Connected with flexible cables
  • Type of protection (modules): IP66
  • Color rendering index Ra: > 80
  • CE marked and UL listed
  • Lifetime (L70/B50): 50,000 h
  • Cable: available in two lengths to suit luminaire design
Product family benefits
  • Uniform illumination at high LED pitches thanks to Square Lens technology
  • Modules are compatible with BackLED mounting profile
  • Significantly better application efficiency compared to systems without lenses
  • Several options for quick and simple mounting: bolting or snap-in
  • Consistent white light (Standard Deviation of Color Matching SDCM: < 3)
  • ENEC certified
  • 5 year guarantee
Areas of application
  • Signage and illuminated advertising
  • Backlighting of small and/or flat channel letters
  • Backlighting of single and double-sided light boxes
  • Permanent outdoor use in enclosed light boxes or channel letters
Equipment / Accessories
  • BackLED mounting profile BA-SM-MP
  • Several types of OPTOTRONIC 12 V power supplies available
Family datasheet

Electrical data

Nominal voltage 12.0 V
Nominal wattage per chain 34.0 W
Nominal wattage per LED module 0.85 W
Reverse Voltage 13 V
Input voltage range 12…13 V
Type of current DC

Photometrical data

Color temperature 3000 K
Color rendering index Ra › 80
Light color (designation) Warm White
Light color LED White
Luminous flux per module chain 3440 lm
Luminous flux per LED module 86 lm
Luminous efficacy 101 lm/W
Standard deviation of color matching ≤3 sdcm

Light technical data

Beam angle 155 °

LED module information

Number of LEDs per module 3
Number of LED modules per chain 40
Minimum operable number of LED modules 1

Dimensions & weight

Length 52.0 mm

Maximum LED pitch 200 mm

Width 12.0 mm
Height 7.1 mm
Product weight 290.00 g

Temperatures & operating conditions

Temperature range in operation at Tc point -25…75 °C

At the Tc point

Lifespan

Lifespan 50000 h

L70/B50 at Tc 75 °C

Additional product data

Product remark Modules perfectly matched to OSRAM OPTOTRONIC LED drivers (see relevant table)/For current photometric data and important safety, installation and application information, see www.osram.com/led-systems./All the technical parameters apply to the entire module. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values

Capabilities

Dimmable Yes
Dimming range 1…100 %

Certificates & standards

Energy consumption 38 kWh/1000h
Energy efficiency class B
Type of protection IP66
Standards Acc. to IEC 62471/Acc. to IEC 60598-1/Acc. to EN 60529/Acc. to EN 62031/Acc. to EN 55015/Acc. to EN 61547/ENEC
Approval marks – approval CE / UL listed / ENEC

Logistical data

Temperature range at storage -25…85 °C
Commodity code 940540399000

EAN

Unit
Piece

Dimension l x w x h

Weight

Volume

4052899504707 BT
1
442.00g
4052899504714 VS
5
460mm x 389mm x 118mm 2917.00g 21.11dm³
Maximum number of LED modules per ECG 141
Maximum number of LED modules per ECG 17
Maximum number of LED modules per ECG 35
Maximum number of LED modules per ECG 70
Maximum number of LED modules per ECG 70
Maximum number of LED modules per ECG 141
Maximum number of LED modules per ECG 70