Digital Systems
 

CV Power supplies 12 V with 1…10 V

CV Power supplies 12 V with 1…10 V

thumbnail

OT 60/220…240/12 P DIM

Product data sheet
Product family features
  • Dimmable via fully isolated 1…10 V interface
  • High IP protection (IP67)
  • High surge protection: up to 3 kV (L-N) / 6 kV (L/N-PE)
Product family benefits
  • Very high efficiency
  • Easy to reduce light output by a simple resistor
  • Slim form factor for installation in light boxes
  • Wide operating temperature range: -30…55 °C
Areas of application
  • Signage
  • Suitable for indoor and outdoor SELV installations
Family datasheet

Electrical data

Nominal input voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage AC 198…264 V
Total harmonic distortion < 20 %
Power factor λ 0.95
ECG efficiency >82 %
Device power loss 13 W
Inrush current < 50 A
Max. ECG no. on circuit breaker 10 A (B) 7
Max. ECG no. on circuit breaker 16 A (B) 11
Max. ECG no. on circuit breaker 25 A (B) -
Surge capability (L-N) 3 kV
Nominal output voltage 12.0 V
U-OUT (working voltage) 12 V
Nominal output power 60 W
Galvanic isolation SELV
Galvanic isolation primary/secondary 3 kV

SELV

Dimensions & weight

Mounting hole spacing, length 200.0 mm
Product weight 700.00 g
Cable cross-section, input side -
Cable cross-section, output side -
Wire preparation length, input side -
Wire preparation length, output side -
Mounting hole spacing, width 27.0 mm
Length 210.0 mm
Height 34.0 mm
Width 50.0 mm

Colors & materials

Casing material Metal

Temperatures & operating conditions

Ambient temperature range -30…+55 °C
Maximum temperature at tc test point 75 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation 5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime 30000 h

At Tcase = 75°C at Tc point / 10% failure rate

Capabilities

Dimmable Yes
Dimming interface 1…10 V
Dimming range 1…100 %
Dimming method Pulse Width Modulation
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Suitable for fixtures with prot. class II
Type of connection, output side Wires

Certificates & standards

Approval marks – approval CE / EAC
Standards Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to EN 55015
Protection class II
Type of protection IP67

Logistical data

Temperature range at storage -40…85 °C
Commodity code 850440829000

EAN

Unit
Piece

Dimension l x w x h

Weight

Volume

4052899947054 FS
1
294mm x 88mm x 55mm 790.00g 1.42dm³
4052899947061 VS
10
499mm x 353mm x 137mm 9395.00g 24.13dm³
Maximum number of LED modules per ECG 46
Maximum number of LED modules per ECG 92
Maximum number of LED modules per ECG 70
Maximum number of LED modules per ECG 95
Maximum number of LED modules per ECG 181
Maximum number of LED modules per ECG 157
Maximum number of LED chains per ECG 1
Maximum number of LED modules per ECG 8
Maximum number of LED modules per ECG 10
Maximum number of LED chains per ECG 1
Maximum number of LED modules per ECG 43