Digital Systems
 

CV Power supplies 12 V

When it comes to lighting design, you can now set your imagination free, wherever and whatever the space concept you are creating, with a choice of 12 V constant voltage drivers from OSRAM. The compact design of the unit makes these power supplies ideal for mounting in very tight spaces and there are options suitable for use in applications both inside and outside. So, whether you are designing luminaires to create ambience in shops or restaurants, creating LED backlighting or other effects in architainment, or using flexible LED strip lights to integrate paths or handrails, you may find your perfect power supply within this range.

CV Power supplies 12 V

Product data sheet
Product family benefits
  • Versatile scope of application due to output power range of up to 120 W
  • Very high efficiency
  • IP rating: up to IP67
  • High surge protection: up to 3 kV (L-N) / 6 kV (L/N-PE)
Areas of application
  • Suitable for indoor and outdoor installations
  • Ideal for mounting in very tight spaces
Family datasheet

Electrical data

Nominal input voltage 110…277 V
Mains frequency 50…60 Hz
Input voltage AC 100…305 V

Permitted voltage range / VAC

Total harmonic distortion < 20 %
Power factor λ 0.95/0.90/0.95/0.90

Full load at 110 V/Half load at 110 V/Full load at 230 V/Half load at 230 V

ECG efficiency ≧85 %

At full load and 110…230 V

Device power loss 9.0 W
Protective conductor current <2.0 mA
Inrush current 15 / 40 / 40 A

200 µs at 110 V / 200 µs at 230 V / 200 µs at 110 V / 200 µs at 230 V

Max. ECG no. on circuit breaker 10 A (B) 8
Max. ECG no. on circuit breaker 16 A (B) 12
Max. ECG no. on circuit breaker 25 A (B) -
Surge capability (L-N) 2 kV
Nominal output voltage 12.5 V

±0.5 V

U-OUT (working voltage) 12.5 V
Nominal output power 60 W

Partial load 6…60 W

Galvanic isolation SELV equivalent
Galvanic isolation primary/secondary 3.75 kV

SELV-equivalent

Surge capability (L/N-Ground) 3 kV

Dimensions & weight

Mounting hole spacing, length 227.0 mm
Product weight 600.00 g
Cable cross-section, input side 0.83 mm²
Cable cross-section, output side 0.83 mm²
Wire preparation length, input side 10 mm
Wire preparation length, output side 10 mm
Length 241.0 mm
Height 30.0 mm
Width 43.0 mm

Colors & materials

Casing material Metal

Temperatures & operating conditions

Ambient temperature range -25…+55 °C
Maximum temperature at tc test point 80 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation 5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime 50000 h

At Tcase = 70°C at Tc point / 10% failure rate

Additional product data

Encapsulated No

Capabilities

Dimmable No
Dimming interface Not dimmable
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Suitable for fixtures with prot. class I
Number of channels 1

Certificates & standards

Approval marks – approval CE / CB / CCC / BIS
Standards Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Protection class I
Type of protection IP64

Logistical data

Temperature range at storage -40…85 °C
Commodity code 850440829000

EAN

Unit
Piece

Dimension l x w x h

Weight

Volume

4008321794338 UNV
1
600.00g
4008321794345 VS
10
278mm x 268mm x 126mm 6546.00g 9.39dm³
Maximum number of LED chains per ECG 1
Maximum number of LED modules per ECG 32
Maximum number of LED modules per ECG 46
Maximum number of LED chains per ECG 4
Maximum number of LED modules per ECG 180
Maximum number of LED modules per ECG 92
Maximum number of LED modules per ECG 70
Maximum number of LED modules per ECG 95
Maximum number of LED chains per ECG 4
Maximum number of LED modules per ECG 180
Maximum number of LED modules per ECG 181
Maximum number of LED modules per ECG 157
Maximum number of LED chains per ECG 1
Maximum number of LED modules per ECG 8
Maximum number of LED modules per ECG 10
Maximum number of LED chains per ECG 1
Maximum number of LED modules per ECG 32
Maximum number of LED chains per ECG 1
Maximum number of LED modules per ECG 43