CV Power supplies 24 V

Product benefits
  • Versatile scope of application due to output power range of up to 240 W
  • Very high efficiency and reliability
  • Constant luminous flux for very low and high temperatures due to Smart Power Supply
Areas of application
  • Suitable for indoor and outdoor SELV installations
  • Outdoor applications only in suitable installations
  • Suitable for use in tight, flat luminaires or installation in suspended ceilings
Family datasheet

Electrical data

Nominal voltage 200…240 V
Mains frequency 50…60 Hz
Input voltage AC 180…264 V

Permitted voltage range

Total harmonic distortion < 20 %
Power factor λ 0.50


ECG efficiency 80 %
Device power loss 1.5 W

Maximum at 230 VAC, Pout=maximum, Ta=25 °C, steady state

Inrush current 15 A

At 240 VAC

Max. ECG no. on circuit breaker 10 A (B) 30
Max. ECG no. on circuit breaker 16 A (B) 48
Max. ECG no. on circuit breaker 25 A (B) -
Surge capability (L-N) 1 kV
Nominal output voltage 24 V

±0.8 V

U-OUT (working voltage) 24 V
Nominal output power 6 W

Partial load 0.4…6 W

Galvanic isolation SELV equivalent
Galvanic isolation primary/secondary 3 kV

Dimensions & weight

Length 51.0 mm
Width 50.0 mm
Height 22.0 mm
Product weight 73.00 g
Cable cross-section, input side 1.0 mm²
Cable cross-section, output side 1.0 mm²
Wire preparation length, input side 10 mm
Wire preparation length, output side 10 mm
Cable/wire length, input side 185 mm
Cable/wire length, output side 135 mm

Colors & materials

Casing material Plastic

Temperatures & operating conditions

Ambient temperature range -20…+50 °C
Maximum temperature at tc test point 70 °C
Max.housing temperature in case of fault 100 °C
Permitted rel. humidity during operation 5…85 %

Maximum 56 days/year at 85 %


ECG lifetime 50000 h

At Tcase = 60°C at Tc point / 10% failure rate

Additional product data

Encapsulated No


Dimmable No

With OPTOTRONIC dimmers

Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Suitable for fixtures with prot. class II

Certificates & standards

Approval marks – approval CE
Approval marks – approval VDE
Approval marks – approval ENEC 10
Approval marks – approval CB
Standards Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to EN 55015/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Type of protection IP65

Logistical data

Temperature range at storage -40…85 °C






4008321113269 UNV
4008321113276 VS
328mm x 76mm x 138mm 1212.50g 3.44dm³


METEL code

STK number

4008321113269 OSROT624CE 4031154