LINEARlight FLEX DIFFUSE Side Monochrome

For lighting designers, OEMs and other professionals, LINEARlight FLEX DIFFUSE 400 Monochrome Side opens up a world of lighting possibilities. A flexible, cuttable strip of LEDs, it gives lines of diffused light without visible spots, leaving you free to follow your light inspiration and create customized, organic-shaped luminaires with ease. This ingenious product is simple to connect and can be mounted on smooth surfaces with the adhesive strip on the back. Alternatively, you can install it with the optional SLIM TRACK System. IP67 protection from dust and water entry, and resistance to UV and salt mist, make LINEARlight FLEX DIFFUSE 400 Monochrome Side suitable for outdoor use, and it is dimmable with PWM technology. You can use up to 6 meters with a single power feed, and it makes a fast and easy system solution when used with OPTOTRONIC electronic control gears. It comes in a range of color temperatures and is great for architectural lighting and signage.

LINEARlight FLEX DIFFUSE Side Monochrome

Product benefits
  • IP67 protection with high performance silicone
  • Outdoor use possible: UV and salt mist resistant (UV acc. to ISO 4892-2 - Method A, salt mist acc. to IEC 60068-2-52 severity 1)
Areas of application
  • Individual and customized luminaires
  • Organic shaped luminaires
  • Architectural Integration – e.g. coves, walls
  • Object integration – e.g. handrails
  • Signage and illuminated advertising
Product features
  • Diffused light lines without visible spots
  • Flexible and cuttable module to support design freedom
  • Long operational length per single power feed possible (up to 6m)
  • Ideal for luminaire designs
  • Extra strong self-adhesive backside for easy mounting
  • 24V technology for easy dimensioning
  • Recommended in system use with OPTOTRONIC
  • Increased reliability due to single piece reel-to-reel technology
  • Dimmable with PWM technology
Family datasheet

Electrical data

Nominal voltage 24.0 V
Type of current DC
Nominal wattage per meter 12.0 W
Rated wattage 72.00 W
Input voltage range 23…25 V
Reverse Voltage 25 V

Photometrical data

Light color LED Blue
Nominal dominant wavelength 457…467 nm
Luminous flux per meter 55 lm
Luminous efficacy 5 lm/W
Light color (designation) Blue

Light technical data

LED pitch 6.7 mm
Beam angle 120 °

LED module information

Number of LEDs per meter 150

Dimensions & weight

Length 6000 mm
Length – smallest unit 40.0 mm
Width 10.0 mm
Height 14.1 mm
Product weight 1040.00 g

Temperatures & operating conditions

Performance temp. acc. to IEC 62717 35 °C
Temperature range in operation -20…65 °C

Exceeding the maximum ratings will reduce expected life time or destroy the LED strip.

Additional product data

Product remark Modules perfectly matched to OSRAM OPTOTRONIC LED drivers (see relevant table)/For current photometric data and important safety, installation and application information, see the technical parameters apply to the entire module. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values


Dimmable Yes


Lowest bending radius 100 mm
Self-adhesive Yes
With connection set Yes
With end piece No

Certificates & standards

Standards CE; ENEC 10 VDE/EAC/UL Recognized component according UL 8750
Type of protection IP67

Logistical data

Temperature range at storage -20…85 °C






4052899953659 FS
4052899954847 VS
519mm x N/A x N/A 8330.00g 67.03dm³
Approximately 6000 mm.
Flexible, bendable LED module in light color not relevant K.
Min. luminous flux of the module 55 lm at 120 ° directional characteristic.
CRI not relevant.

Operation of the module at 24V constant voltage SELV area.
Divisibility of the module in 40.0 mm sections.

Assembly of the feeder and connector is done without any tools.

Optional electrical parallel connection of the modules.
Single light points of the module visible, usage of high-quality brand LEDs.
Light dot pitch on module 6.7 mm.

Module dimmable by pulse width modulation.
Possibility of operation of 40.0 mm at a feed point of the module.
Module out of operation constantly in a temperature range of -20…65 °C.
Max. dimensions of the LED module (width x height) 10.0 mm x 14.1 mm.