Optimize your design freedom with LINEARlight FLEX Protect POWER 2000, a flexible, cuttable strip of efficient LEDs (luminous flux up to 2,000 lm/m) that is dimmable with many common electronic control gears and created with the needs of lighting designers, OEMs and other professionals in mind. Easy to integrate into a system solution with OPTOTRONIC electronic control gears, LINEARlight FLEX Protect POWER 2000 is flexible enough to use in challenging luminaire shapes and contours; it is also protected to IP67 and resistant to salt mist and UV, so you can use it outside as well as inside. Its consistent, reliable light make it ideal for architectural lighting, wall and ceiling integration, cove lighting, machine lighting and path lighting. It is easy to connect, and if you choose to use the matching CONNECTsystem, you will not need tools to join modules. Mounting is straightforward; often the adhesive strip on the reverse is sufficient, but it can also be installed quickly using the optional SLIM TRACK System.

LINEARlight FLEX Protect POWER 2000

Product benefits
  • High luminous flux
  • Great design freedom thanks to flexibility and cuttability of module
  • High-performance silicone for extremely long life and flexibility
  • Simple connection thanks to premounted connectors
  • Extraordinary design and high quality materials
  • Toolless connection only if using the optional CONNECTsystem
  • Easy mounting on many smooth surfaces thanks to self-adhesive tape at the back
  • Outdoor use possible: UV and salt mist resistant (UV acc. to ISO 4892-2 - Method A, salt mist acc. to IEC 60068-2-52 severity 1)
Areas of application
  • Facade accent lighting
  • Ceiling integration
  • Wall integration
  • Cove lighting
  • Machine lighting
  • Path lighting
  • Suitable for outdoor use
Product features
  • Flexible and cuttable LED strip
  • Luminous flux: up to 2,000 lm/m
  • Type of protection: IP67
  • Dimmable with PWM technology
  • Fine White (3.5 SDCM)
Equipment / Accessories
  • Simplified connection with optional matching CONNECTsystem
  • Quick installation with optional SLIM TRACK System
  • Perfectly matched to OPTOTRONIC 24 V electronic control gears
Family datasheet

Electrical data

Nominal voltage 24.0 V
Nominal current 3.4 A
Rated wattage 80.55 W
Nominal wattage 80.55 W
Nominal wattage per meter 17.9 W
Reverse Voltage 25 V
Type of current DC
Input voltage range 23…24 V

Photometrical data

Color temperature 2400 K
Color rendering index Ra >80
Light color (designation) Warm White
Light color LED White
Luminous flux per meter 1800 lm
Luminous flux 8100 lm
Luminous efficacy 101 lm/W

Light technical data

Beam angle 120 °
LED pitch 14.3 mm

LED module information

Number of LEDs per module 315
Number of LEDs per meter 70

Dimensions & weight

Length 4500 mm
Length – smallest unit 100.0 mm
Width 11.1 mm
Height 3.7 mm
Cable length 500.0 mm
Product weight 282.00 g

Colors & materials

Cover material Silicone
Body material Silicone

Temperatures & operating conditions

Temperature range in operation -20…70 °C

Lifespan

Lifespan 50000 h

L70/B50 at Tc 40 °C

Additional product data

Product remark Modules perfectly matched to OSRAM OPTOTRONIC LED drivers (see relevant table)/For current photometric data and important safety, installation and application information, see www.osram.com/led-systems/All the technical parameters apply to the entire module. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values

Capabilities

Dimmable Yes
Lowest bending radius 50 mm
Self-adhesive Yes
With connection set Yes
With end piece Yes

Certificates & standards

Energy consumption 89 kWh/1000h
Type of protection IP67
Energy efficiency class A+

Applicable on smallest operable unit

Standards UL/CE; ENEC 10 VDE

Logistical data

Temperature range at storage -40…85 °C

EAN

Unit
Piece

Dimension

Weight

Volume

4052899481138 FS
1
353mm x 349mm x 32mm 761.00g 3.94dm³
4052899481145 VS
8
365mm x N/A x N/A 6474.00g 38.21dm³
Approximately 4500 mm.
Flexible, bendable LED module in light color 2400 K.
Min. luminous flux of the module 1800 lm at 120 ° directional characteristic.
CRI >80.

Operation of the module at 24V constant voltage SELV area.
Divisibility of the module in 100.0 mm sections.

Assembly of the feeder and connector is done without any tools.

Optional electrical parallel connection of the modules.
Single light points of the module visible, usage of high-quality brand LEDs.
Light dot pitch on module 14.3 mm.

Module dimmable by pulse width modulation.
Possibility of operation of 100.0 mm at a feed point of the module.
Module out of operation constantly in a temperature range of -20…70 °C.
Max. dimensions of the LED module (width x height) 11.1 mm x 3.7 mm.