OTi DALI 75/220…240/500 D NFC FL

Product family benefits
  • Flat housing (16 mm height) for innovative luminaire designs and applications
  • Fully programmable via software (DALI Interface, NFC)
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • Prepared for DiiA Specification Parts -251, -252 and -253
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High-quality dimming of 1…100 % (amplitude and/or PWM selectable by software)
  • Higher quality of light thanks to < 1% output ripple current
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for luminaires of protection class I
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Input voltage DC

176…276 V

Current set

DALI / NFC / Programmable

Total harmonic distortion

5.50 %

Power factor λ

0.61C…0.99

Efficiency in full-load

93.5 %

at 230 V, 50 Hz

Device power loss

6.0 W

Protective conductor current

<0.5 mA

Inrush current

28 A

Max. ECG no. on circuit breaker 10 A (B)

14

Max. ECG no. on circuit breaker 16 A (B)

23

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

54…240 V

U-OUT (working voltage)

< 250 V

Nominal output current

120…500 mA

Default output current

125 mA

Output current tolerance

±3 %

Output ripple current (100 Hz)

< 1 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

6.5…75 W

Maximum output power

75 W

Galvanic isolation

Non isolated

Power loss in stand-by mode

<0.15 W

Dimensions & weight

Mounting hole spacing, length

270.0 mm

Product weight

205.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

8.0…9.0 mm

Wire preparation length, output side

8.0…9.0 mm

Length

280.0 mm

Height

16.0 mm

Width

30.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-25…+60 °C

Maximum temperature at tc test point

75 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 / 100000 h

Capabilities

Programming interface

DALI, NFC

Dimmable

Yes

Dimming interface

DALI-2 / Touch DIM / Touch DIM Sensor

Dimming range

0.1…100 %

Dimming method

Full analogue dimming / AM/PWM selectable

Constant lumen function

Programmable

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I

Suitable for emergency lighting

Yes

Type of connection, input side

Push terminal

Type of connection, output side

Push terminal

Number of channels

1

DALI-2 Diagnostic Data

Yes

DALI-2 Energy Data

Yes

Control interface

DALI

Programming

Programming device

DALI magic / NFC Scanner

Tuner4TRONIC Field App

Yes

Box programming

Yes

Programmable features

DALI-2 Luminaire Data

Yes

Certificates & standards

Approval marks – approval

CE / EL / VDE-ENEC / EAC / CCC / RCM / BIS

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 62386/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Type of protection

IP20

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

07-07-2023

Primary Article Identifier

4062172020787

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

5ecf784a-d49b-40a3-8f2f-7f2dfa5e33ea

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172020787 UNV

Unpacked

1 280mm x 30mm x 16mm 205.00g 0.13dm³
4062172020794 VS

Shipping box

20 300mm x 128mm x 106mm 4223.00g 4.07dm³

Downloads

Information about Family

Future proof – enable innovative luminaires design with latest technology

Some special features of this product include advanced luminaire/driver data for analytics, SelectDIM (AM/PWM) by Tuner4TRONIC and the opportunity for DiiA Specification Parts -251, -252 and -253. The drivers are also fully digitally programmable by DALI and NFC and offer a high lighting quality due to low ripple.
Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile DALI window driver up to 75 W due to flexible output characteristic
  • Supply voltage: 220…240 V
  • Available with output current range: up to 500 mA
  • DALI-2 certified (Part -101,-102 and -207)
  • Monitoring of luminaire operating parameters
  • Constant Lumen Output (CLO)
  • Non-isolated drivers
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OTi DALI 25/220…240/300 D NFC FL
54…240 V 35…300 mA 280.0 mm 30.0 mm 16.0 mm
OTi DALI 35/220…240/400 D NFC FL
54…240 V 75…400 mA 280.0 mm 30.0 mm 16.0 mm
OTi DALI 75/220…240/500 D NFC FL
54…240 V 120…500 mA 280.0 mm 30.0 mm 16.0 mm