OTi DALI 35/220...240/1A0 NFC L

Product family benefits
  • Fully programmable via software (DALI Interface, NFC)
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • DALI-2 certified incl. Parts 251, 252, 253
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High-quality dimming of 1…100 % by amplitude dimming
  • Higher quality of light thanks to < 3% output ripple current
  • Very high efficiency
  • Very low standby power consumption: < 0.15 W *
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for luminaires of protection class I
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Input voltage DC

176…276 V

Current set

DALI / NFC / Programmable

Total harmonic distortion

≤ 10 %

Power factor λ

0.61C…0.98

Efficiency in full-load

89 %

at 230 V, 50 Hz

Device power loss

3.0 W

Inrush current

≤ 20 A

Max. ECG no. on circuit breaker 10 A (B)

14

Max. ECG no. on circuit breaker 10 A (C)

-

Max. ECG no. on circuit breaker 16 A (C)

-

Max. ECG no. on circuit breaker 16 A (B)

24

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

15…54 V

U-OUT (working voltage)

< 60 V

Nominal output current

200…1050 mA

Default output current

350 mA

Output current tolerance

±3 %

Output ripple current (100 Hz)

≤ 3 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

4…37 W

Maximum output power

37 W

Galvanic isolation

SELV

Power loss in stand-by mode

≤0.15 W

Dimensions & weight

Mounting hole spacing, length

270.0 mm

Product weight

209.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

8.0…9.0 mm

Wire preparation length, output side

8.0…9.0 mm

Width

30.0 mm

Length

280.0 mm

Height

21.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-25…+60 °C

Maximum temperature at tc test point

75 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

100000 / 50000 h

Additional product data

Encapsulated

No

Capabilities

Programming interface

DALI, NFC

Dimmable

Yes

Dimming interface

DALI-2 / Touch DIM / Touch DIM Sensor

Dimming range

1…100 %

Dimming method

Full analogue dimming

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I

Suitable for emergency lighting

Yes

Type of connection, input side

Push terminal

Type of connection, output side

Push terminal

DALI-2 Energy Data

Yes

Constant lumen function

Programmable

DALI-2 Diagnostic Data

Yes

Control interface

DALI

Number of channels

1

Programming

Programming device

DALI magic / NFC Scanner

Tuner4TRONIC

Yes

Tuner4TRONIC Field App

Yes

Box programming

Yes

Programmable features

DALI-2 Luminaire Data

Yes

TouchDIM + Sensor

Yes

Certificates & standards

Approval marks – approval

CE / EL / VDE-ENEC / EAC / CCC / BIS / RCM

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 62386/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61347

Type of protection

IP20

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

21-04-2023

Primary Article Identifier

4062172074964

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

b69841e5-6d04-44fe-9877-8bb334af0e7a

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172074964 UNV

Unpacked

1 209.00g
4062172074971 VS

Shipping box

20 303mm x 159mm x 105mm 4307.00g 5.06dm³

Downloads

Information about Family

Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile DALI window driver up to 50 W due to flexible output characteristic
  • Supply voltage: 220…240 V
  • Available with output current range: up to 1,400 mA
  • Constant Lumen Output (CLO)
  • Integrated customizable thermal management (Driver Guard)
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OTi DALI 25/220...240/700 NFC L
15…54 V 100…700 mA 280.0 mm 30.0 mm 21.0 mm
OTi DALI 35/220...240/1A0 NFC L
15…54 V 200…1050 mA 280.0 mm 30.0 mm 21.0 mm
OTi DALI 50/220...240/1A4 NFC L
15…54 V 400...1400 mA 280.0 mm 30.0 mm 21.0 mm
OTi DALI 80/220…240/2A1 NFC L
20…54 V 600…2100 mA 360.0 mm 30.0 mm 21.0 mm