OTi DALI 20/220...240/500 NFC I

Product family benefits
  • Versatile DALI window driver due to flexible output characteristic
  • Locking and unlocking of luminaire/driver data
  • Easy and fast output current setting via NFC
  • Very high efficiency
  • High-quality dimming of 1…100 % by amplitude dimming
  • DALI-2 certified incl. Parts 251, 252, 253
Areas of application
  • Suitable for downlights, spotlights and LED panels
  • Suitable for use in luminaires with flexible current setting
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection classes I and II
German innovation awards 2019 winner DALI 2 Logo black and white 540301_SELV, short circuit proof

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0,50,60 Hz

Input voltage AC

198…264 V

Permitted voltage range

Input voltage DC

176…276 V

Total harmonic distortion

< 10 %

At full load, 220…240 V, 50 Hz / see graphs

Power factor λ

0.61C...0.95

Efficiency in full-load

88 %

at 230 V, 50 Hz

Inrush current

< 20 A

twidth = 200 µs (measured at 50 % Ipeak)

Max. ECG no. on circuit breaker 10 A (B)

20

Max. ECG no. on circuit breaker 16 A (B)

30

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

20…50 V

Maximum 60 V

U-OUT (working voltage)

60 V

Nominal output current

200…500 mA

±5%

Default output current

350 mA

Output current tolerance

±5 %

Output ripple current (100 Hz)

< 5 %

Ripple average at 100 Hz

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

20 W

Partial load 4…20 W

Maximum output power

20 W

Galvanic isolation DALI/output

SELV

Networked standby power

≤0.18 W

at 230 V, 50 Hz

Galvanic isolation DALI/mains

Basic

Power loss in stand-by mode

<0.15 W

Galvanic isolation primary/secondary

SELV

Current set

DALI / NFC

Dimensions & weight

Mounting hole spacing, length

186.5 mm

Product weight

160.00 g

Cable cross-section, input side

0.2…2.5 mm²

Solid or flexible leads

Cable cross-section, output side

0.2…1.5 mm²

Solid or flexible leads

Wire preparation length, input side

7…8 mm

Wire preparation length, output side

8.0…9.0 mm

Length

204.0 mm

Height

32.0 mm

Width

50.0 mm

Colors & materials

Casing material

Plastic

Temperatures & operating conditions

Ambient temperature range

-20…+50 °C

Maximum temperature at tc test point

75 °C

Maximum at the Tc-point

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-25…85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 / 100000 h

Tc = 75°C, 0.2% / 1,000 h failure rate / Tc = 65°C, 0.1% / 1,000 h failure rate

Additional product data

Encapsulated

No

Capabilities

Dimmable

Yes

Dimming interface

DALI-2

Dimming range

1…100 %

Dimming method

Amplitude Modulation

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I / II

Type of connection, input side

Screw terminal

Type of connection, output side

Push terminal

Programming interface

DALI, NFC

Number of channels

1

Constant lumen function

Programmable

DALI-2 Diagnostic Data

Yes

Acc. DALI part 253

DALI-2 Energy Data

Yes

Acc. DALI part 252

Suitable for emergency lighting

Yes

Control interface

DALI-2

Suitable for through-wiring

Yes

Programming

Tuner4TRONIC

Yes

Programming device

DALI / NFC

Tuner4TRONIC Field App

Yes

Box programming

Yes

Programmable features

Operating Current

Yes

OEM Key

No

Configuration Lock

Yes

DALI-2 Luminaire Data

Yes

Acc. DALI part 251

Emergency Mode

Yes

TouchDIM + Sensor

No

Dim to Dark

Yes

Soft Switch Off

Yes

Driver Guard

Yes

DALI Settings

Yes

Corridor Functionality

No

Constant Lumen

Yes

Lamp Operating Time

Yes

Certificates & standards

Approval marks – approval

CE / EL / DALI-2 / EAC

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386/Acc. to IEC 62386-101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC 62386-207:Ed1

Protection class

II

Type of protection

IP20

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

28-04-2023

Primary Article Identifier

4062172114967

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

4091d053-f0ca-4748-84b0-fea365ceb59b

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172114967 UNV

Unpacked

1 204mm x 50mm x 32mm 160.00g 0.33dm³
4062172114974 VS

Shipping box

20 428mm x 173mm x 121mm 3467.00g 8.96dm³

Downloads

Information about Family

Miniaturization – full DALI functionality – ready for IoT

This device has a DALI 2 interface and is fully digitally programmable by NFC and DALI with integrated luminaire info and data monitoring DiiA -251, -252, -253. It is also available as an independent version with cable clamps, screw terminals on the primary side and through-looping.
Product family features
  • Supply voltage: 220…240 V
  • Line frequency: 0 Hz, 50…60 Hz
  • Line voltage: 198…264 V
  • According to EN 61347-1, 61347-2-13, 62384
  • RI suppression: to EN 55015/CISPR 15
  • Immunity according to EN 61547
  • Type of protection: IP20
  • Integrated cable clamp for luminaire and independent installation
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OTi DALI 20/220...240/500 NFC I
20…50 V 200…500 mA 204.0 mm 50.0 mm 32.0 mm
OTi DALI 30/220...240/700 NFC I
20…50 V 350…700 mA 204.0 mm 50.0 mm 32.0 mm
OTi DALI 40/220...240/1A0 NFC I
20…50 V 500…1050 mA 204.0 mm 50.0 mm 32.0 mm