BackLED Area White

Product family features
  • 24 V constant voltage LED modules
  • Color temperature: 2,700 K, 3,000 K or 4,000 K
  • Color rendering index Ra: > 90
  • Consistent white light: 3 SDCM
  • Constant LED pitch even at board interconnections
  • Cuttable, single board for an exact fit in any installation
Product family benefits
  • Provides homogenous light suitable for application in area luminaires
  • Quick and easy mounting thanks to plastic holder
  • Easy wiring with push-in connectors
  • Low energy consumption and less heat generation
  • Optimal operation on OPTOTRONIC 24VDC and 24VDC dimmable power supplies


Sort by:
Luminous flux per LED module
Nominal wattage per LED module
Luminous efficacy
Data sheet
BA-AR-G1 900 540X270 927
900 lm 9 W 100 lm/W
BA-AR-G1 900 540X270 930
920 lm 9 W 102 lm/W
BA-AR-G1 900 540X270 940
950 lm 8.6 W 110 lm/W

Information about Family

Areas of application
  • Area lighting
  • Light ceilings
  • Hospitality, hotels, restaurants
  • Museums, art galleries
  • Individual and customized luminaires
  • Backlighting shallow box signs
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.