BA-BAR 16PICS KIT
Product family benefits
- Reduce timing for BackLED Area installation
- Can be easily shortened to any length
- Quick and easy mounting of the bars with self-tapping screws or pop rivets
- Improve BackLED Area adherence to installation surface
Areas of application
- Suitable for BackLED Area G1
Technical Data
Dimensions & weight
Product weight
2050 g
Width
15 mm
Length
568 mm
Height
30 mm
Logistical data
Commodity code
39269097900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
05-09-2023
Primary Article Identifier
4062172197168
Declaration No. in SCIP database
In work
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4062172197168 |
FS
| 1 | 572mm x 52mm x 17mm | 49.00g | 0.51dm³ |
| 4062172197175 |
VS
| 10 | 582mm x 113mm x 97mm | 637.00g | 6.38dm³ |
Downloads
Data sheets
Information about Family
Product family features
- Compatible with BackLED Area G1
- Easily adaptable
- Special shape for maximum positioning freedom
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product | Data sheet | ||
|---|---|---|---|
|
|
BA-BAR 16PICS KIT
|