BX-DS-MP

Product family benefits
  • Can be easily shortened to any length
  • Quick and easy mounting of the profile with self-tapping screws or pop rivets
  • Quick and simple snap-in fixing of the LED modules, no tools required
  • Robust aluminum profile
Areas of application
  • Signage and illuminated advertising
  • Backlighting of double-sided light boxes and pylons
  • Permanent outdoor use in enclosed light boxes
Equipment / Accessories
  • Suitable for BackLED DS Plus

Technical Data

Dimensions & weight

Product weight

352.60 g

Width

13.0 mm

Height

13.3 mm

Length

2000 mm

Logistical data

Commodity code

76169990990

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

09-08-2022

Primary Article Identifier

4008321880307

Candidate List Substance 1

No declarable substances contained

Declaration No. in SCIP database

No declarable substances contained

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4008321880307 UNV

Unpacked

1 2000mm x 13mm x 13mm 352.00g 0.32dm³
4008321872197 VS

Shipping box

24 2060mm x 116mm x 64mm 9097.00g 15.29dm³

Downloads

Information about Family

Product family features
  • Universally applicable mounting profile for BackLED DS Plus LED modules
  • Overall length: 2,000 mm
  • Integrated 50 mm mounting grid for simple positioning of the LED modules
  • Integrated fixing option for cables
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products