BA-L-CP-880-24-G5
- Energy saving with high efficacy
- Backside injection technology for high protection level
- Flammability rating at V0
- Channel letters
- Signage boxes
- Luminous areas and ceilings
Technical Data
Electrical data
Nominal voltage
24.0 V
Nominal wattage per chain
43.20 W
Nominal wattage per LED module
1.2 W
Accidental reverse input voltage protection up to
24 V
Input voltage range
23.4...24.9 V
Type of current
DC
Photometrical data
Color temperature
8000 K
Color rendering index Ra
>80
Light color LED
Cold white
Luminous flux per module chain
5400 lm
Luminous flux per LED module
150 lm
Luminous efficacy
125 lm/W
Standard deviation of color matching
≤3 sdcm
Luminous flux per chain at Ta 25 °C
5400 lm
Light technical data
Beam angle
155 °
LED module information
Number of LEDs per module
2
Number of LED modules per chain
36
Minimum operable number of LED modules
1
Dimensions & weight
Length
11100 mm
Width
17.8 mm
Height
12.1 mm
Product weight
468.00 g
Temperatures & operating conditions
Temperature range in operation at Tc point
-25 75 °C
Temperature range at storage
-25 85 °C
Lifespan
Lifespan
50000 h
Additional product data
Product remark
Modules perfectly matched to OSRAM OPTOTRONIC LED drivers (see relevant table)/For current photometric data and important safety, installation and application information (see www.osram.com/led-systems)./In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values
ID of contained light source
LS_SHZ_600811
Capabilities
Dimmable
Yes
Dimming range
1 100 %
Certificates & standards
Energy consumption
44 kWh/1000h
Type of protection
IP66
Standards
Acc. to EN 62471:2008/Acc. to IEC 62031/ENEC/CE/UL
Energy efficiency class of the contained light source
E
Approval marks approval
CE / ENEC 25 / cURus / UKCA / BIS
Logistical data
Commodity code
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
31-03-2023
Primary Article Identifier
4052899627406
Candidate List Substance 1
No declarable substances contained
Declaration No. in SCIP database
No declarable substances contained
Downloads
Accessories optional
Information about Family
- Each LED module contains 2 LEDs
- Compatible with OSRAM OPTOTRONIC constant voltage drivers / dimmers
- Color consistency in 3 SDCM
- Patented Square Lens technology
- Wide CCT and color options available
- IP66 rating
- Lifetime (L80/B10): 50,000 h (temperature at Tc = 75 °C)
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
BA-L-CP-810-24-G5
|
10000 K | >80 | 150 lm | 1.2 W | 125 lm/W | |||
BA-L-CP-880-24-G5
|
8000 K | >80 | 150 lm | 1.2 W | 125 lm/W | |||
BA-L-CP-871-24-G5
|
7100 K | >80 | 160 lm | 1.2 W | 133 lm/W | |||
BA-L-CP-865-24-G5
|
6500 K | >80 | 160 lm | 1.2 W | 133 lm/W | |||
BA-L-CP-840-24-G5
|
4000 K | >80 | 160 lm | 1.2 W | 133 lm/W | |||
BA-L-CP-830-24-G5
|
3000 K | >80 | 153 lm | 1.2 W | 128 lm/W |