BA-L-PL 830 G3
- Uniform illumination at high LED pitches thanks to Square Lens technology
- Click and Play: quick and easy click-in of the LED modules, no tools needed
- High module efficacy: up to 116 lm/W
- Dimming capability: 1 10 V, DALI and DMX methods
- Lifetime (L80/B10): 50,000 h (temperature at Tc = 75 °C)
- 5 year guarantee
- Signage and illuminated advertising
- Backlighting of single and double-sided light boxes
- Permanent outdoor use in enclosed light boxes
- Architectural and decorative applications
- Mounting profile BA-MP
- Several types of OPTOTRONIC 12 V LED drivers available
References / Links
For more information on the multi-level guarantee and the terms and conditions of the guarantee visit https://www.inventronics-light.com/multilevel-guarantees
Technical Data
Electrical data
Nominal voltage
12.0 V
Nominal wattage per chain
46.00 W
Nominal wattage per LED module
1.31 W
Accidental reverse input voltage protection up to
13 V
Input voltage range
12 13 V
Type of current
DC
Photometrical data
Color temperature
3000 K
Color rendering index Ra
>80
Light color (designation)
Warm White
Light color LED
Warm white
Luminous flux per module chain
5400 lm
Luminous flux per LED module
150 lm
Luminous efficacy
115 lm/W
Standard deviation of color matching
≤3 sdcm
LED module information
Number of LEDs per module
3
Number of LED modules per chain
36
Minimum operable number of LED modules
1
Dimensions & weight
Length
11100 mm
Width
17.6 mm
Height
7.8 mm
Product weight
604.00 g
Module pitch
300 mm
Module length
76.0 mm
Temperatures & operating conditions
Temperature range in operation at Tc point
-25 75 °C
Temperature range at storage
-25 85 °C
Lifespan
Lifespan
50000 h
Additional product data
Product remark
Modules perfectly matched to OSRAM OPTOTRONIC LED drivers (see relevant table)/For current photometric data and important safety, installation and application information (see www.osram.com/led-systems)./All the technical parameters apply to the entire module. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values/In development, data preliminary
Predecessor EAN
4052899442634
Successor EAN
4052899627444
Capabilities
Dimming range
1 100 %
Certificates & standards
Energy consumption
2 kWh/1000h
Type of protection
IP66/IP68
Standards
Acc. to ENEC 10/CE; VDE/EAC/ENEC/UL
Approval marks approval
UL recognized component / CE / ENEC
Energy efficiency class of the contained light source
F
Logistical data
Commodity code
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
23-05-2022
Primary Article Identifier
4052899990463
Candidate List Substance 1
No declarable substances contained
Declaration No. in SCIP database
No declarable substances contained
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4052899990463 |
FS
| 1 | 425mm x 179mm x 54mm | 977.00g | 4.11dm³ |
4052899990470 |
VS
| 5 | 438mm x 284mm x 198mm | 5185.00g | 24.63dm³ |
Downloads
Information about Family
- Connected with flexible cables
- Type of protection (modules): IP66/IP68
- Color rendering index Ra: > 80
- Single bin LEDs for all CCTs
- Consistent white light: < 3 SDCM
- CE marked, ENEC certified, UL recognized component
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
- Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
BA-L-PL 830 G3
|
3000 K | >80 | 150 lm | 1.31 W | 115 lm/W |