BA-S-PL 865 G3

Product family benefits
  • Uniform illumination at high LED pitches thanks to Square Lens technology
  • Modules are compatible with BackLED mounting profile
  • Significantly better application efficiency compared to systems without lenses
  • Several options for quick and simple mounting: bolting or snap-in
  • Consistent white light (Standard Deviation of Color Matching SDCM: < 3)
  • ENEC certified
  • 5 year guarantee
Areas of application
  • Signage and illuminated advertising
  • Backlighting of small and/or flat channel letters
  • Backlighting of single and double-sided light boxes
  • Permanent outdoor use in enclosed light boxes or channel letters
Equipment / Accessories
  • BackLED mounting profile BA-SM-MP
  • Several types of OPTOTRONIC 12 V power supplies available

References / Links
For more information on the multi-level guarantee and the terms and conditions of the guarantee visit


Technical Data

Electrical data

Nominal voltage

12.0 V

Nominal wattage per chain

30.00 W

Nominal wattage per LED module

0.33 W

Accidental reverse input voltage protection up to

13 V

Input voltage range

12…13 V

Type of current


Photometrical data

Color temperature

6500 K

Color rendering index Ra


Light color (designation)

Cool White

Light color LED


Luminous flux per module chain

3510 lm

Luminous flux per LED module

39 lm

Luminous efficacy

116/114 lm/W

Cool conditions (Tc = 25 °C) / Steady state (Ta = 25 °C)

Standard deviation of color matching

≤3 sdcm

Light technical data

Beam angle

155 °

LED module information

Number of LEDs per module


Number of LED modules per chain


Minimum operable number of LED modules


Dimensions & weight


12454 mm


12.0 mm


6.0 mm

Product weight

504.00 g

Module pitch

40 mm

Module length

108.0 mm

Temperatures & operating conditions

Temperature range in operation at Tc point

-25…65 °C

At the Tc point

Temperature range at storage

-25…85 °C



50000 h

Additional product data

Product remark

Modules perfectly matched to OSRAM OPTOTRONIC LED drivers (see relevant table)/For current photometric data and important safety, installation and application information (see the technical parameters apply to the entire module. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values

Successor EAN


ID of contained light source



Dimming range

1…100 %

Certificates & standards

Energy consumption

34 kWh/1000h

Type of protection



Acc. to IEC 62471/Acc. to IEC 60598-1/Acc. to EN 60529/Acc. to EN 62031/Acc. to EN 55015/Acc. to EN 61547/ENEC

Energy efficiency class of the contained light source


Approval marks – approval

CE / ENEC / UL recognized component

Logistical data

Commodity code


Packaging information




Dimension l x w x h



4052899504639 FS

Folding box

1 415mm x 279mm x 48mm 844.00g 5.56dm³
4052899504646 VS

Shipping box

5 428mm x 254mm x 298mm 4612.00g 32.40dm³


Accessories optional

Information about Family

The IP66-protected and robustly encapsulated LED modules of the BackLED S Plus G3 are joined by flexible cables and both CE marked and UL listed, with a long lifespan and module efficacy of up to 130 lm / W. This module is particularly useful for signage and illuminated advertising; you can also use it to light small and/or flat channel letters and to backlight single or double-sided light boxes. You can install it outside, permanently, as long as it is within an enclosed light box or channel letters. BackLED S Plus G3 gives you consistent white light (SDCM < 3), uniform illumination at high LED pitches thanks to its Square Lens technology, and significantly better application efficiency than systems without lenses. BackLED S Plus G3 is ENEC certified and comes with a 5 year guarantee.
Product family features
  • Connected with flexible cables
  • Type of protection (modules): IP66
  • Color rendering index Ra: > 80
  • CE marked, ENEC certified, UL recognized component
  • Lifetime (L70/B50): 50,000 h
  • Module efficacy: up to 130 lm/W
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.


Sort by:
Color temperature
Color rendering index Ra
Luminous flux per LED module
Nominal wattage per LED module
Luminous efficacy
Data sheet
BA-S-PL 830 G3
3000 K 80 37 lm 0.33 W 110/108 lm/W
BA-S-PL 865 G3
6500 K 80 39 lm 0.33 W 116/114 lm/W