BA-MP-L-G5-2M

Product family benefits

Can be easily shortened to any length
Quick and simple snap-in fixing of the LED modules, no tools required
Robust aluminum profile
Quick and easy mounting of the profile with self-tapping screws or pop rivets
Quick and simple snap-in fixing the cables of the LED modules, no tools required

Areas of application

Suitable for BA-TW-CP-G5, BA-XL-CP-G5, BA-L-CP-G5, BA-M-HO-CP-G5 , BA-M-CP-G5, BA-M-CP-G5-HF, BA-S-CP-G5

Data sheet

Technical Data

Dimensions & weight

Product weight

214.50 g

Length

2000 mm

Width

20.0 mm

Height

8.9 mm

Logistical data

Commodity code

76169990990

Environmental information

Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

27-01-2022

Primary Article Identifier

4052899629189

Candidate List Substance 1

No declarable substances contained

Declaration No. in SCIP database

No declarable substances contained

Packaging information

EAN	Unit	Piece	Dimension l x w x h	Weight	Volume
4052899629189	UNV Unpacked	1
4052899629202	VS Shipping box	50	2060mm x 165mm x 88mm	11550.00g	29.91dm³

Downloads

Data sheets

Family data sheet

Data sheet

Information about Family

Product family features

Overall length available 2 m
Compatible with BackLED G5 family
Suitable for BA-TW-CP-G5/BA-XL-CP-G5/ BA-L-CP-G5/BA-M-HO-CP-G5/BA-M-CP-G5/BA-M-CP-G5-HF/ BA-S-CP-G5

Ecodesign regulation information:

This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
	Product	Data sheet
	BA-MP-L-G5-2M
	BA-MP-SM-G5-2M