BX-ECO-M-PL 865

Product family benefits
  • Modules are compatible with the BoxLED mounting profile
  • Uniform illumination thanks to optimized elliptical lenses
  • Several options for quick and simple mounting: bolting or snap-in
  • Excellent module efficacy
  • Cost-effective solution with reliable performance
  • 5 year guarantee
Areas of application
  • Signage and illuminated advertising
  • Illumination of single and double-sided light boxes
  • Permanent outdoor use in enclosed light boxes
Equipment / Accessories
  • Several types of OPTOTRONIC 24 V power supplies available
  • BoxLED mounting profile BX-MP

References / Links
For more information on the multi-level guarantee and the terms and conditions of the guarantee visit https://www.inventronics-light.com/multilevel-guarantees

484426_Tonne-de

Technical Data

Electrical data

Nominal wattage per LED module

3.1 W

Accidental reverse input voltage protection up to

24 V

Input voltage range

23…25 V

Type of current

DC

Photometrical data

Light color (designation)

Cool White

Light color LED

White

Luminous flux per module chain

10094 lm

Luminous flux per LED module

315 lm

Luminous efficacy

101/91 lm/W

Cool conditions (Tc = 25 °C) / Steady state (Ta = 25 °C)

Color temperature

6500 K

Color rendering index Ra

› 80

LED module information

Number of LEDs per module

6

Number of LED modules per chain

32

Minimum operable number of LED modules

1

Dimensions & weight

Height

25.1 mm

Module pitch

135 mm

Module length

14.9 mm

Width

NaN mm

Length

NaN mm

Maximum LED pitch 300 mm

Temperatures & operating conditions

Temperature range in operation at Tc point

-25…70 °C

Temperature range at storage

-25…85 °C

Additional product data

Product remark

Modules perfectly matched to OSRAM OPTOTRONIC LED drivers (see relevant table)/For current photometric data and important safety, installation and application information (see www.osram.com/led-systems)./All the technical parameters apply to the entire module. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values

Capabilities

Dimming range

1…100 %

Certificates & standards

Type of protection

IP66

Standards

Acc. to IEC 62471/Acc. to IEC 60598-1/Acc. to EN 60529/Acc. to EN 62031/Acc. to EN 55015/Acc. to EN 61547

Energy efficiency class of the contained light source

F

Approval marks – approval

CE

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

26-05-2023

Declaration No. in SCIP database

In work

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899946996 FS

Folding box

1 482mm x 370mm x 48mm 2349.00g 8.56dm³
4052899947009 VS

Shipping box

5 495mm x 255mm x 390mm 12335.00g 49.23dm³

Downloads

Accessories optional

Modul-ECG Combination

Information about Family

BoxLED ECO M Plus G3 is a chain of 32, IP66-protected and robustly encapsulated LED modules that are connected with flexible cables. It is made with an integrated heat sink, has optimized elliptical lenses to give uniform illumination, and is compatible with the BoxLED mounting profile. You can choose your most appropriate variant and will find BoxLED ECO M Plus G3 easy to use (it is quick and simple to mount with snap-in or bolting options), highly efficient, cost-effective and reliable. BoxLED ECO M Plus G3 is a great choice for signage, illuminated advertising and to light single- and double-sided light boxes. You can site modules permanently outside, as long as you put them in enclosed light boxes, and BoxLED ECO M Plus G3 comes with a 5 year guarantee.
Product family features
  • Chain of 32 linear LED modules
  • Connected with flexible cables
  • Type of protection (modules): IP66
  • Fully integrated heat sink
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Color temperature
Color rendering index Ra
Luminous flux per LED module
Nominal wattage per LED module
Luminous efficacy
Data sheet
BX-ECO-M-PL 865
6500 K › 80 315 lm 3.1 W 101/91 lm/W