Products...
OSRAM Products...
LED Drivers...
Constant Voltage – Indoor...
Constant Voltage – Dimmable...
CV PROTECTED Power supplies with DALI...

OTi DALI 210/220-240/24 1-4 CH

Back to family CV PROTECTED Power supplies with DALI
Product family benefits
  • Long lasting and high reliability
  • From 1 to 4 channels to arbitrarily distribute the power
  • Suitable for installation under sunlight
  • IP66/IP67 Salt mist resistant and DC functionality
  • AstroDim functionality for automatic dimming and turn on/off
Areas of application
  • Public squares and architecture lighting
  • In building facades, luminous signage
  • Suitable for indoor and outdoor SELV installations
  • Suitable for use in luminaires of protection class I
Data sheet
More downloads

Technical Data

Electrical data

Nominal input voltage

230…240 V

Mains frequency

50/60 Hz

Input voltage AC

198…264 V

Total harmonic distortion

< 5 %

Power factor λ

> 0.95

Efficiency in full-load

93%

at 230 V, 50 Hz

Device power loss

18.4 W

Inrush current

3.7 A

Max. ECG no. on circuit breaker 10 A (C)

7

Max. ECG no. on circuit breaker 10 A (B)

7

Max. ECG no. on circuit breaker 16 A (B)

11

Max. ECG no. on circuit breaker 16 A (C)

11

Max. ECG no. on circuit breaker 25 A (B)

17

Surge capability (L/N-Ground)

8 kV

Surge capability (L-N)

6 kV

Nominal output voltage

24.7 V

DC voltage

U-OUT (working voltage)

24.7 V

Nominal output power

210 W

Lamp failure detection: minimum load per channel that doesn't trigger open circuit detection is 30 W

Maximum output power

210 W

at steady state

Galvanic isolation

SELV

Galvanic isolation primary/secondary

3 kV

Output PWM frequency

1k Hz

Output ripple Voltage (100 Hz)

< 5 %

Input voltage DC

176…276 V

with external fuse

Dimensions & weight

Mounting hole spacing, length

326.0 mm

Product weight

1415.00 g

Cable cross-section, input side

1.0 mm²

Cable cross-section, output side

1.5 mm²

Wire preparation length, input side

90 mm

Wire preparation length, output side

90 mm

Mounting hole spacing, width

320.0 mm

Length

330.0 mm

Width

69.0 mm

Height

37.0 mm

Colors & materials

Casing material

Aluminium

Temperatures & operating conditions

Ambient temperature range

-20…+60 °C

Maximum temperature at tc test point

85 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 h

Capabilities

Dimmable

Yes

Dimming interface

DALI-2

Dimming range

0.1…100 %

Dimming method

Pulse Width Modulation

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Suitable for fixtures with prot. class

I

Type of connection, input side

Wires

Type of connection, output side

Wires

Number of channels

4

Certificates & standards

Approval marks – approval

BIS / CCC / CE / EAC / ENEC 10 / RCM / VDE / VDE-EMC

Standards

Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 55015/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 61347-1/Acc. to EN 62493

Protection class

I

Type of protection

IP66/IP67

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

30-08-2023

Primary Article Identifier

4062172032087

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

2aa25e91-6f84-40c5-8e57-f9de80b14741

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume
4062172032087 FS

Folding box

 1 361mm x 81mm x 84mm 1468.00g 2.46dm³
4062172032094 VS

Shipping box

 6 380mm x 262mm x 201mm 9195.00g 20.01dm³

Downloads

Data sheets

Family data sheet
Data sheet
OPTOTRONIC LED Power Supply

User instruction

Size: 3.3 MB
OTi DALI 210 1-4CH Technical Datasheet (EN)

Product Datasheet

Size: 632.8 kB
OPTOTRONIC constant-voltage LED power supplies and controls (EN)

Brochures

Size: 1.7 MB
CB TEST CERTIFICATE DE1-62077

Certificates

Size: 144.5 kB
OT ENEC 40050684 251122

Certificates

Size: 484.3 kB
OTi DALI 210 CB DE1 63487 280420

Certificates

Size: 208.4 kB
OTI DALI 210 1 4 CH IEC DE1 63487 A1 220920

Certificates

Size: 207.8 kB
VDE ENEC Certificate 40043863

Certificates

Size: 419.6 kB
OT EMC 40038482 290922

Certificates

Size: 257 kB
OTi DALI 210 24 CE 3772470 03 280723

Declarations of conformity

Size: 225.9 kB
3D STEP file

CAD data 3-dim

Size: 279.2 kB
OTi DALI 210 220-240 24 1-4 CH - 3D stp file

CAD data 3-dim

Size: 300.6 kB

Information about Family

Versatile - for stunning installations under challenging conditions

An installation of these supplies in harsh conditions is possible thanks to IP66 & IP67 protection and an AstroDIM function allow autonomous diming and turn on/off. Some other features include a DALI-2 standard, 6 kV and 8 kV overvoltage protection and a wide temperature range from -30°C to +60°C.
Product family features
  • 1 to 4 DALI addressable channels
  • LED driver whose output power can be shared arbitrarily among the 1 or 4 channels
  • AstroDim functionality
  • Dimming range: 0/0, 1…100 %
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • High level surge protection: up to 6 kV (L-N), 8 kV (L/N-PE)
  • Inrush current limiter circuit
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products