OT 15/220…240/12 P

Product family benefits
  • Versatile scope of application due to output power range of up to 120 W
  • Very high efficiency
  • IP rating: up to IP67
  • High surge protection: up to 3 kV (L-N) / 6 kV (L/N-PE)
Areas of application
  • Suitable for indoor and outdoor installations
  • Ideal for mounting in very tight spaces

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

50…60 Hz

Input voltage AC

198…264 V

VAC

Total harmonic distortion

< 20 %

Power factor λ

> 0.5

Full load at 230 V

Efficiency in full-load

79 %

at 230 V, 50 Hz

Device power loss

3.0 W

Inrush current

20 A

twidth = 170 µs (measured at 50 % Ipeak)

Max. ECG no. on circuit breaker 10 A (B)

32

Max. ECG no. on circuit breaker 16 A (B)

51

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L-N)

4 kV

Nominal output voltage

12.5 V

±0.5 V

U-OUT (working voltage)

12.5 V

Nominal output power

15 W

Partial load 0…15 W

Maximum output power

15 W

at steady state

Galvanic isolation

SELV equivalent

Galvanic isolation primary/secondary

3.75 kV

SELV-equivalent

Dimensions & weight

Mounting hole spacing, length

228.0 mm

Product weight

170.00 g

Cable cross-section, input side

1.0 mm²

Flexible

Cable cross-section, output side

1.0 mm²

Flexible

Wire preparation length, input side

10 mm

Wire preparation length, output side

10 mm

Cable/wire length, input side

300 mm

Cable/wire length, output side

300 mm

Length

237.0 mm

Width

20.0 mm

Height

22.0 mm

Colors & materials

Casing material

Plastic

Temperatures & operating conditions

Ambient temperature range

-25…+55 °C

Maximum temperature at tc test point

80 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Non-condensing

Lifespan

ECG lifetime

50000 h

At Ta = 70°C / 10% failure rate

Capabilities

Dimmable

No

Dimming interface

Not dimmable

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Suitable for fixtures with prot. class

II

Number of channels

1

Certificates & standards

Approval marks – approval

CE / ENEC 18 / CB / CCC / EAC

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to EN 61000-3-2/Acc. to EN 61547

Protection class

II

Type of protection

IP66

Logistical data

Commodity code

850440829000

Environmental information

Date of Declaration

10-11-2021

Primary Article Identifier

4052899905559

Candidate List Substance 1

No declarable substances contained

CAS No. of substance 1

No CAS

Declaration No. in SCIP database

No declarable substances contained

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899905559 UNV

Unpacked

1
4052899905580 VS

Shipping box

50 356mm x 309mm x 209mm 11035.00g 22.99dm³

Downloads

Tools

Driver Selector
Driver Selector
Use our free Driver Selector tool to find your specific LED driver Try it out now
Modul-ECG Combination
BA-S-PL BLUE/GREEN

Maximum number of LED chains per ECG

1

Maximum number of LED modules per ECG

45

BX-XS-PL

Maximum number of LED chains per ECG

0.25

Maximum number of LED modules per ECG

8

Information about Family

When it comes to lighting design, you can now set your imagination free, wherever and whatever the space concept you are creating, with a choice of 12 V constant voltage drivers from OSRAM. The compact design of the unit makes these power supplies ideal for mounting in very tight spaces and there are options suitable for use in applications both inside and outside. So, whether you are designing luminaires to create ambience in shops or restaurants, creating LED backlighting or other effects in architainment, or using flexible LED strip lights to integrate paths or handrails, you may find your perfect power supply within this range.
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output power
Dimmable
Length
Width
Height
Data sheet
OT 15/220…240/12 P
15 W No 237.0 mm 20.0 mm 22.0 mm
OT 30/220…240/12 P
30 W No 220.0 mm 40.0 mm 22.0 mm
OT FIT 60/220-240/12 P
60 W No 157.0 mm 53.0 mm 31.5 mm
OT FIT 150/220-240/12 P
150 W No 202.0 mm 53.0 mm 31.5 mm
OT FIT 300/220-240/12 P
300 W No 266.0 mm 83.0 mm 39.5 mm