OT FIT 60/220-240/12 P
Product family benefits
- Versatile scope of application due to output power range of up to 120 W
- Very high efficiency
- IP rating: up to IP67
- High surge protection: up to 3 kV (L-N) / 6 kV (L/N-PE)
Areas of application
- Suitable for indoor and outdoor installations
- Ideal for mounting in very tight spaces
Technical Data
Electrical data
Nominal input voltage
220 240 V
Mains frequency
50 60 Hz
Input voltage AC
198 264 V
Total harmonic distortion
< 5 %
Power factor λ
0.95
Efficiency in full-load
87 %
Device power loss
8.6 W
Inrush current
45 A
Max. ECG no. on circuit breaker 10 A (B)
6
Max. ECG no. on circuit breaker 10 A (C)
14
Max. ECG no. on circuit breaker 16 A (B)
13
Max. ECG no. on circuit breaker 16 A (C)
23
Max. ECG no. on circuit breaker 25 A (B)
22
Surge capability (L-N)
6 kV
Nominal output voltage
12.5 V
U-OUT (working voltage)
13 V
Nominal output power
60 W
Maximum output power
60 W
Galvanic isolation
SELV
Surge capability (L/N-Ground)
6 kV
Output ripple Voltage (100 Hz)
< 3 %
Dimensions & weight
Mounting hole spacing, length
153 mm
Product weight
473.00 g
Cable cross-section, input side
1.0 mm²
Cable cross-section, output side
1.0 mm²
Wire preparation length, input side
60 mm
Wire preparation length, output side
10 mm
Length
157.0 mm
Width
53.0 mm
Height
31.5 mm
Mounting hole spacing, width
27.0 mm
Colors & materials
Casing material
Metal
Temperatures & operating conditions
Ambient temperature range
-40 +50 °C
Maximum temperature at tc test point
80 °C
Max.housing temperature in case of fault
-
Temperature range at storage
-40 +85 °C
Permitted rel. humidity during operation
5 85 %
Lifespan
ECG lifetime
50000 h
Additional product data
Predecessor EAN
4008321790811
Capabilities
Dimmable
No
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Suitable for fixtures with prot. class
I
Type of connection, input side
Wires
Type of connection, output side
Wires
Number of channels
1
Certificates & standards
Approval marks approval
CE / CCC / ENEC / TISI / RCM
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384
Protection class
I
Type of protection
IP66/IP67
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
02-11-2023
Primary Article Identifier
4062172133487
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
1e137453-4bbb-4752-a12a-f0fd7442c94e
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4062172133487 |
UNV
| 1 | 157mm x 53mm x 32mm | 473.00g | 0.26dm³ |
4062172133494 |
VS
| 15 | 349mm x 224mm x 153mm | 7430.00g | 11.96dm³ |
Downloads
Information about Family
When it comes to lighting design, you can now set your imagination free, wherever and whatever the space concept you are creating, with a choice of 12 V constant voltage drivers from OSRAM. The compact design of the unit makes these power supplies ideal for mounting in very tight spaces and there are options suitable for use in applications both inside and outside. So, whether you are designing luminaires to create ambience in shops or restaurants, creating LED backlighting or other effects in architainment, or using flexible LED strip lights to integrate paths or handrails, you may find your perfect power supply within this range.
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
OT FIT 60/220-240/12 P
|
60 W | No | 157.0 mm | 53.0 mm | 31.5 mm | |||
OT FIT 150/220-240/12 P
|
150 W | No | 202.0 mm | 53.0 mm | 31.5 mm | |||
OT FIT 300/220-240/12 P
|
300 W | No | 266.0 mm | 83.0 mm | 39.5 mm |