OT FIT 300/220-240/12 P

Product family benefits
  • Versatile scope of application due to output power range of up to 120 W
  • Very high efficiency
  • IP rating: up to IP67
  • High surge protection: up to 3 kV (L-N) / 6 kV (L/N-PE)
Areas of application
  • Suitable for indoor and outdoor installations
  • Ideal for mounting in very tight spaces

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

50…60 Hz

Input voltage AC

198…264 V

Total harmonic distortion

< 5 %

At full load, 230 V, 50 Hz / see graphs

Power factor λ

0.95

Typical, Full load, 230 VAC, 50 Hz / 60 Hz

Efficiency in full-load

91 %

at 230 V, 50 Hz

Device power loss

28 W

Inrush current

70 A

At Full Load, 240VAC, Cold Start
Duration=800uS 50%Ipk—50%Ipk

Max. ECG no. on circuit breaker 10 A (C)

4

Max. ECG no. on circuit breaker 10 A (B)

2

Max. ECG no. on circuit breaker 16 A (B)

4

Max. ECG no. on circuit breaker 16 A (C)

7

Max. ECG no. on circuit breaker 25 A (B)

6

Surge capability (L-N)

6 kV

Nominal output voltage

12.5 V

U-OUT (working voltage)

13 V

Nominal output power

300 W

Maximum output power

300 W

at steady state

Galvanic isolation

SELV

Output ripple Voltage (100 Hz)

< 3 %

ripple @ 100 Hz / full load

Surge capability (L/N-Ground)

6 kV

Dimensions & weight

Mounting hole spacing, length

251 mm

Product weight

1510.00 g

Cable cross-section, input side

1.0 mm²

H05RN-F/3x1.0 mm2

Cable cross-section, output side

2.5 mm²

H07RN-F/2x2.5 mm2

Wire preparation length, input side

60 mm

Wire preparation length, output side

10 mm

Width

83.0 mm

Length

266.0 mm

Mounting hole spacing, width

34.0 mm

Height

39.5 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-40…+50 °C

At fullload, Tc not exceeded

Maximum temperature at tc test point

90 °C

Max.housing temperature in case of fault

-

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Non-condensing

Lifespan

ECG lifetime

50000 h

Tc = 80°C, 0.2% / 1,000 h failure rate

Capabilities

Dimmable

No

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Suitable for fixtures with prot. class

I

Type of connection, input side

Wires

Type of connection, output side

Wires

Number of channels

1

Certificates & standards

Approval marks – approval

CE / CCC / ENEC / TISI / RCM

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384

Protection class

I

Type of protection

IP66/IP67

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

08-09-2023

Primary Article Identifier

4062172133548

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

f6f619d4-fd85-43b3-ad54-4e74de23f6ac

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172133548 UNV

Unpacked

1 266mm x 83mm x 40mm 1510.00g 0.87dm³
4062172133555 VS

Shipping box

10 419mm x 329mm x 123mm 15747.00g 16.96dm³

Downloads

Information about Family

When it comes to lighting design, you can now set your imagination free, wherever and whatever the space concept you are creating, with a choice of 12 V constant voltage drivers from OSRAM. The compact design of the unit makes these power supplies ideal for mounting in very tight spaces and there are options suitable for use in applications both inside and outside. So, whether you are designing luminaires to create ambience in shops or restaurants, creating LED backlighting or other effects in architainment, or using flexible LED strip lights to integrate paths or handrails, you may find your perfect power supply within this range.
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output power
Dimmable
Length
Width
Height
Data sheet
OT FIT 60/220-240/12 P
60 W No 157.0 mm 53.0 mm 31.5 mm
OT FIT 150/220-240/12 P
150 W No 202.0 mm 53.0 mm 31.5 mm
OT FIT 300/220-240/12 P
300 W No 266.0 mm 83.0 mm 39.5 mm