OT FIT 150/220-240/12 P
Product family benefits
- Versatile scope of application due to output power range of up to 300 W
- Very high efficiency
- IP rating: up to IP67
- High surge protection: up to 6 kV (L-N) / 6 kV (L/N-PE)
Areas of application
- Suitable for indoor and outdoor installations
- Ideal for mounting in very tight spaces
Technical Data
Electrical data
Nominal output power
150 W
Mains frequency
50…60 Hz
Nominal voltage
220…240 V
Nominal current
0.85 A
Device power loss
14.8 W
Power factor λ
0.95
Inrush current
55 A
Output ripple Voltage (100 Hz)
< 3 %
Input voltage AC
198…264 V
Efficiency in full-load
91 %
Nominal output voltage
12.5 V
Dimensions & weight
Length
202.0 mm
Width
53.0 mm
Height
31.5 mm
Mounting hole spacing, length
188.0 mm
Mounting hole spacing, width
27.0 mm
Product weight
920.00 g
Temperatures & operating conditions
Ambient temperature range
-40…+50 °C
Permitted rel. humidity during operation
5…85 %
Additional product data
Predecessor EAN
4008321790835
Capabilities
Suitable for fixtures with prot. class
I / II
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Number of channels
1
Dimmable
No
Certificates & standards
Type of protection
IP66/IP67
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384
Approval marks – approval
CE / CCC / ENEC / TISI / RCM
Logistical data
Commodity code
850440839000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
21-04-2023
Primary Article Identifier
4062172133500
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
5941b12c-fdbd-4665-be0a-8342b8906820
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4062172133500 |
UNV
| 1 | |||
| 4062172133517 |
VS
| 15 | 349mm x 284mm x 153mm | 14185.00g | 15.16dm³ |
Downloads
Data sheets
Information about Family
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
OT FIT 60/220-240/12 P
|
60 W | No | 157.0 mm | 53.0 mm | 31.5 mm | ||
|
|
OT FIT 150/220-240/12 P
|
150 W | No | 202.0 mm | 53.0 mm | 31.5 mm | ||
|
OT FIT 300/220-240/12 P
|
300 W | No | 266.0 mm | 83.0 mm | 39.5 mm |