OT 130/220 240/24 DIM P
Product family benefits
- Large range of products from 20 W to 250 W
- Installation in very cold and hot environments
- Very stable output power
- High electronical reversible short-circuit, overload, overtemperature protection
- Smart Power Supply: boosting power to turn on cold LEDs
- Independent installation possible
- Dimming range: 1 100 %
Areas of application
- Facades, public squares, cruise ships
- Signage
- Suitable for indoor and outdoor installations
Technical Data
Electrical data
Nominal output power
130 W
Maximum output power
130 W
Mains frequency
0 60 Hz
Efficiency in full-load
90.5 %
Galvanic isolation primary/secondary
3 kV
Inrush current
60 A
Input voltage DC
176 276 V
Nominal output voltage
24.2 V
Nominal voltage
220 240 V
Device power loss
13.3 W
Input voltage AC
198 264 V
Power factor λ
095
Dimensions & weight
Mounting hole spacing, length
207.0 mm
Length
2200 mm
Height
370 mm
Width
630 mm
Product weight
94300 g
Temperatures & operating conditions
Permitted rel. humidity during operation
5 85 %
Ambient temperature range
-30 +55 °C
Additional product data
Predecessor EAN
4008321981691
Capabilities
Suitable for fixtures with prot. class
I
Overheating protection
Yes
Overload protection
Yes
Short-circuit protection
Yes
No-load proof
Yes
Intended for no-load operation
No
Number of channels
1
Dimmable
Yes
Dimming interface
1 10 V
Certificates & standards
Type of protection
IP66/IP67
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384
Approval marks approval
ENEC / RCM / CCC / EAC
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
23-06-2023
Primary Article Identifier
4052899545885
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
f1105f25-6e31-4c8a-ac85-f86a35b70f5b
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4052899545885 |
FS
| 1 | 283mm x 84mm x 49mm | 986.00g | 1.16dm³ |
4052899545892 |
VS
| 10 | 439mm x 299mm x 126mm | 10590.00g | 16.54dm³ |
Downloads
Information about Family
Product family features
- DC mode functionality
- Type of protection: IP66 and IP67
- Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE)
- Wide operating temperature range: -30 +55 °C
- Lifetime: up to 50,000 h (temperature at max. tc )
- Dimmable via fully isolated 1 10 V interface
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
OT 20/220
240/24 DIM P
|
20 W | Yes | 1780 mm | 430 mm | 250 mm | |||
OT 40/220
240/24 DIM P
|
40 W | Yes | 2080 mm | 430 mm | 260 mm | |||
OT 60/220
240/24 DIM P
|
60 W | Yes | 2080 mm | 430 mm | 260 mm | |||
OT 100/220
240/24 DIM P
|
100 W | Yes | 2400 mm | 500 mm | 340 mm | |||
OT 130/220
240/24 DIM P
|
130 W | Yes | 2200 mm | 630 mm | 370 mm | |||
OT 250/220
240/24 DIM P
|
250 W | Yes | 2650 mm | 680 mm | 400 mm |