OT 250/220…240/24 DIM P

Product family benefits
  • Large range of products from 20 W to 250 W
  • Installation in very cold and hot environments
  • Very stable output power
  • High electronical reversible short-circuit, overload, overtemperature protection
  • Smart Power Supply: boosting power to turn on cold LEDs
  • Independent installation possible
  • Dimming range: 1…100 %
Areas of application
  • Facades, public squares, cruise ships
  • Signage
  • Suitable for indoor and outdoor installations

Technical Data

Electrical data

Nominal output power

250 W

Maximum output power

250 W

at steady state

Mains frequency

0…60 Hz

Efficiency in full-load

92 %

at 230 V, 50 Hz

Galvanic isolation primary/secondary

3 kV

Inrush current

75 A

Input voltage DC

176…276 V

Nominal output voltage

24.2 V

Nominal voltage

220…240 V

Device power loss

20 W

Input voltage AC

198…264 V

Power factor λ

0.95

Dimensions & weight

Mounting hole spacing, length

250.0 mm

Length

265.0 mm

Height

40.0 mm

Width

68.0 mm

Product weight

1340.00 g

Temperatures & operating conditions

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Ambient temperature range

-30…+55 °C

Additional product data

Predecessor EAN

4008321981714

Capabilities

Suitable for fixtures with prot. class

I

Overheating protection

Yes

Overload protection

Yes

Short-circuit protection

Yes

No-load proof

Yes

Intended for no-load operation

No

Number of channels

1

Dimmable

Yes

Dimming interface

1…10 V

Certificates & standards

Type of protection

IP66/IP67

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384

Approval marks – approval

ENEC / RCM / CCC / EAC

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

28-04-2023

Primary Article Identifier

4052899545908

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

6106517c-2d32-4662-a057-18d404237ee9

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899545908 FS

Folding box

1 326mm x 88mm x 51mm 1385.00g 1.46dm³
4052899545915 VS

Shipping box

10 459mm x 344mm x 144mm 14752.00g 22.74dm³

Downloads

Information about Family

Product family features
  • DC mode functionality
  • Type of protection: IP66 and IP67
  • Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE)
  • Wide operating temperature range: -30…+55 °C
  • Lifetime: up to 50,000 h (temperature at max. tc )
  • Dimmable via fully isolated 1…10 V interface
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output power
Dimmable
Length
Width
Height
Data sheet
OT 20/220…240/24 DIM P
20 W Yes 178.0 mm 43.0 mm 25.0 mm
OT 40/220…240/24 DIM P
40 W Yes 208.0 mm 43.0 mm 26.0 mm
OT 60/220…240/24 DIM P
60 W Yes 208.0 mm 43.0 mm 26.0 mm
OT 100/220…240/24 DIM P
100 W Yes 240.0 mm 50.0 mm 34.0 mm
OT 130/220…240/24 DIM P
130 W Yes 220.0 mm 63.0 mm 37.0 mm
OT 250/220…240/24 DIM P
250 W Yes 265.0 mm 68.0 mm 40.0 mm