OTI BLE 80/220…240/24 1…4 CH
.jpg)
.jpg)
Product family benefits
- Power supply and control of white, Tunable White, Tunable Warm White, Dim to Warm
- Power supply and control of RGB and RGBW LED modules
- Driver with integrated CASAMBI lighting control system
- Slim form factor for installation in light boxes
Areas of application
- Suitable for indoor installations
- Shops and hospitality: retail, hotels, restaurants
- Museums, residential buildings
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
50/60 Hz
Input voltage AC
198…264 V
Total harmonic distortion
< 5 %
Power factor λ
0.98
Efficiency in full-load
93 %
Device power loss
-
Inrush current
48 A
Max. ECG no. on circuit breaker 10 A (B)
7
Max. ECG no. on circuit breaker 10 A (C)
7
Max. ECG no. on circuit breaker 16 A (B)
11
Max. ECG no. on circuit breaker 16 A (C)
11
Max. ECG no. on circuit breaker 25 A (B)
17
Surge capability (L/N-Ground)
-
Surge capability (L-N)
1 kV
Nominal output voltage
24 V
U-OUT (working voltage)
24.2 V
Nominal output power
80 W
Maximum output power
80 W
Galvanic isolation
SELV
Galvanic isolation primary/secondary
3.75 kV
Output ripple Voltage (100 Hz)
< 5 %
Input voltage DC
176…276 V
Output PWM frequency
2k Hz
Dimensions & weight
Mounting hole spacing, length
303 mm
Product weight
191.00 g
Cable cross-section, input side
0.5…2.5 mm²
Cable cross-section, output side
0.2…1.5 mm²
Wire preparation length, input side
6.0 mm
Wire preparation length, output side
5.0 mm
Mounting hole spacing, width
0 mm
Width
32.0 mm
Length
346.0 mm
Height
22.0 mm
Colors & materials
Casing material
Plastic
Temperatures & operating conditions
Ambient temperature range
-20…+45 °C
Maximum temperature at tc test point
80 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-40…+85 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
50000 h
Capabilities
Dimmable
Yes
Dimming interface
Bluetooth CASAMBI
Dimming range
0.4…100 %
Dimming method
Pulse Width Modulation
Overheating protection
Reversible
Overload protection
Reversible
Short-circuit protection
Reversible
No-load proof
Yes
Intended for no-load operation
No
Suitable for fixtures with prot. class
I / II
Type of connection, output side
Screw terminal
Number of channels
4
Certificates & standards
Approval marks – approval
VDE / RCM / EAC
Standards
CE/ENEC
Protection class
II
Type of protection
IP20
Logistical data
Commodity code
850440839000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
28-04-2023
Primary Article Identifier
4062172046558
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
5833340c-6e4b-442a-9a3e-1b73ec585239
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4062172046558 |
UNV
| 1 | |||
| 4062172046565 |
VS
| 20 | 370mm x 170mm x 113mm | 3998.00g | 7.11dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
Future proof - ready for wireless applications
A wireless control of white, Tunable (Warm) White, Dim to Warm, RGB and RGBW LED modules is possible via the integrated lighting control system CASAMBI. Some other features include the dimming range of 0,4 – 100% and the possibility to install a connection with sensors and smart switches.
A wireless control of white, Tunable (Warm) White, Dim to Warm, RGB and RGBW LED modules is possible via the integrated lighting control system CASAMBI. Some other features include the dimming range of 0,4 – 100% and the possibility to install a connection with sensors and smart switches.
Product family features
- 80 W/24 V LED driver, 1–4 channels
- Power metering on the app interface
- Lighting wireless Bluetooth Mesh network, up to 127 devices
- Different light profiles to customize the application
- 2 KHz PWM control unit
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
|
OTI BLE 80/220…240/24 1…4 CH
|
80 W | Yes | 346.0 mm | 32.0 mm | 22.0 mm |