OT 20/220…240/24
Product family benefits
- Installation in cold and hot environments
- Very stable output power
- High electronical reversible short-circuit, overload, overtemperature protection
- Independent installation possible
Areas of application
- Facades, public squares, cruise ships
- Signage
- Suitable for indoor and outdoor installations
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
50…60 Hz
Input voltage AC
198…264 V
Input voltage DC
-
Total harmonic distortion
150 %
Power factor λ
0.50
Efficiency in full-load
83 %
Device power loss
4.0 W
Inrush current
17 A
Max. ECG no. on circuit breaker 10 A (B)
23
Max. ECG no. on circuit breaker 10 A (C)
-
Max. ECG no. on circuit breaker 16 A (B)
42
Max. ECG no. on circuit breaker 16 A (C)
-
Max. ECG no. on circuit breaker 25 A (B)
-
Surge capability (L-N)
1 kV
Nominal output voltage
24 V
U-OUT (working voltage)
24 V
Nominal output power
20 W
Maximum output power
20 W
Galvanic isolation
SELV
Galvanic isolation primary/secondary
3 kV
Output ripple Voltage (100 Hz)
-
Surge capability (L/N-Ground)
-
Dimensions & weight
Mounting hole spacing, length
-
Product weight
108.00 g
Cable cross-section, input side
0.75…1.5 mm²
Cable cross-section, output side
0.5…1.5 mm²
Wire preparation length, input side
10 mm
Wire preparation length, output side
10 mm
Cable/wire length, input side
-
Cable/wire length, output side
-
Width
50.0 mm
Height
35.0 mm
Length
109.0 mm
Colors & materials
Casing material
Plastic
Temperatures & operating conditions
Ambient temperature range
-20…+50 °C
Maximum temperature at tc test point
70 °C
Max.housing temperature in case of fault
90 °C
Temperature range at storage
-40…+85 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
30000 h
Capabilities
Dimmable
No
Dimming interface
-
Dimming range
-
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Suitable for fixtures with prot. class
II
Type of connection, output side
Screw terminal
Number of channels
1
Certificates & standards
Approval marks – approval
CE / ENEC 10 / VDE / VDE-EMC / RCM
Standards
Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to EN 55015/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Protection class
II
Type of protection
IP20
Logistical data
Commodity code
850440829000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
14-04-2022
Primary Article Identifier
4050300618111
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
bbe50d75-fd0a-4476-b0c2-34d70d2132b2
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4050300618111 |
UNV
| 1 | |||
| 4050300618128 |
VS
| 20 | 270mm x 105mm x 229mm | 2396.00g | 6.49dm³ |
Downloads
Data sheets
Modul-ECG Combination
LF05E2 36W
Maximum length of LED module per ECG
4.8 m
LFD MS 290
LFD MS 500
LFD MT 290
Information about Family
Untroubled - a reliable power source for lighting
The OT SLIM is the slimmest cross-section available in the market and different powers ensure that all installation needs can be fulfilled. A lifetime of up to 50.000 h and an IP20 protection across the product family are some additional highlights.
The OT SLIM is the slimmest cross-section available in the market and different powers ensure that all installation needs can be fulfilled. A lifetime of up to 50.000 h and an IP20 protection across the product family are some additional highlights.
Product family features
- Type of protection: IP20
- Wide operating temperature range: -20…+50 °C
- Lifetime: up to 50,000 h (temperature at max. tc )
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
OT SLIM 30/220-240/24
|
30 W | No | 270.0 mm | 30.0 mm | 17.5 mm | ||
|
OT SLIM 60/220-240/24
|
60 W | No | 338.0 mm | 30.0 mm | 17.5 mm | ||
|
OT SLIM 100/220-240/24
|
100 W | No | 374.0 mm | 30.0 mm | 18.5 mm | ||
|
OT SLIM 160/220-240/24
|
160 W | No | 404.0 mm | 30.0 mm | 21.5 mm | ||
|
OT SLIM 250/220-240/24
|
250 W | No | 343.0 mm | 60.0 mm | 31.0 mm | ||
|
OT 6/200…240/24 CE
|
6 W | No | 51.0 mm | 50.0 mm | 22.0 mm | ||
|
|
OT 20/220…240/24
|
20 W | No | 109.0 mm | 50.0 mm | 35.0 mm |
