CV Power supplies 24 V

Product family features
  • DC mode functionality
  • Type of protection: IP66 and IP67
  • Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE)
  • Wide operating temperature range: -30…+55 °C
  • Lifetime: up to 50,000 h (temperature at max. tc )
Product family benefits
  • Large range of products from 20 W to 250 W
  • Installation in very cold and hot environments
  • Very stable output power
  • High electronical reversible short-circuit, overload, overtemperature protection
  • Smart Power Supply: boosting power to turn on cold LEDs
  • Independent installation possible

Products

Sort by:
Product
Nominal output power
Dimmable
Length
Width
Height
Data sheet
OT 20/220…240/24 P
20 W No 178.0 mm 43.0 mm 25.0 mm
OT 40/220…240/24 P
40 W No 208.0 mm 43.0 mm 26.0 mm
OT 60/220…240/24 P
60 W No 208.0 mm 43.0 mm 26.0 mm
OT 100/220…240/24 P
100 W No 240.0 mm 50.0 mm 34.0 mm
OT 130/220…240/24 P
130 W No 220.0 mm 63.0 mm 37.0 mm
OTe 120/220…240/24 E
120 W No 258.0 mm 51.0 mm 45.0 mm
OT 250/220…240/24 P
250 W No 265.0 mm 68.0 mm 40.0 mm

Information about Family

Power your light inspiration, wherever it is and whatever form it takes, with your choice of constant voltage driver 24 V from the OSRAM range. You can even design these slender power supplies into tight, flat luminaires and suspended ceilings, and use them in SELV installations inside or even outside (as long as they are in suitable luminaires). If you are creating ambiance with light, perhaps in shoplighting designed to bring out the best in products, LED backlighting or bar lighting, or if you are designing striking architainment, you may find your ideal driver within this range.
Areas of application
  • Facades, public squares, cruise ships
  • Signage
  • Suitable for indoor and outdoor installations
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads

Tools

Driver Selector
Driver Selector
Use our free Driver Selector tool to find your specific LED driver Try it out now