OT 100/220 240/24 P
Product family benefits
- Large range of products from 20 W to 250 W
- Installation in very cold and hot environments
- Very stable output power
- High electronical reversible short-circuit, overload, overtemperature protection
- Smart Power Supply: boosting power to turn on cold LEDs
- Independent installation possible
Areas of application
- Facades, public squares, cruise ships
- Signage
- Suitable for indoor and outdoor installations
Technical Data
Electrical data
Nominal output power
100 W
Mains frequency
0 60 Hz
Nominal voltage
220 240 V
Device power loss
11.8 W
Power factor λ
0.95
Inrush current
60 A
Galvanic isolation primary/secondary
3 kV
Input voltage AC
198 264 V
Input voltage DC
176 250 V
Efficiency in full-load
90 %
Nominal output voltage
24.2 V
Dimensions & weight
Length
240.0 mm
Width
50.0 mm
Height
34.0 mm
Mounting hole spacing, length
227.0 mm
Product weight
765.00 g
Temperatures & operating conditions
Ambient temperature range
-30 +55 °C
Permitted rel. humidity during operation
5 85 %
Additional product data
Predecessor EAN
4008321981684
Capabilities
Suitable for fixtures with prot. class
I
Overheating protection
Yes
Overload protection
Yes
Short-circuit protection
Yes
No-load proof
Yes
Number of channels
1
Dimmable
No
Certificates & standards
Type of protection
IP66/IP67
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384
Approval marks approval
ENEC / RCM / CCC / EAC / CE
Logistical data
Commodity code
850440839000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
28-04-2023
Primary Article Identifier
4052899545984
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
892b2c4e-6da4-474a-b802-06e32bee6fb9
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4052899545984 |
FS
| 1 | 306mm x 73mm x 46mm | 804.00g | 1.03dm³ |
4052899545991 |
VS
| 10 | 384mm x 324mm x 134mm | 8704.00g | 16.67dm³ |
Downloads
Data sheets
Modul-ECG Combination
BA-XL-PL G3
Maximum number of LED modules per ECG
45
BX-ECO-M-PL
Maximum number of LED modules per ECG
32
BXI-L-PL
Maximum number of LED modules per ECG
16
BX-M-PL G3
Maximum number of LED chains per ECG
1
Maximum number of LED modules per ECG
33
Information about Family
Power your light inspiration, wherever it is and whatever form it takes, with your choice of constant voltage driver 24 V from the OSRAM range. You can even design these slender power supplies into tight, flat luminaires and suspended ceilings, and use them in SELV installations inside or even outside (as long as they are in suitable luminaires). If you are creating ambiance with light, perhaps in shoplighting designed to bring out the best in products, LED backlighting or bar lighting, or if you are designing striking architainment, you may find your ideal driver within this range.
Product family features
- DC mode functionality
- Type of protection: IP66 and IP67
- Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE)
- Wide operating temperature range: -30 +55 °C
- Lifetime: up to 50,000 h (temperature at max. tc )
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
![]() |
OT 20/220
240/24 P
|
20 W | No | 178.0 mm | 43.0 mm | 25.0 mm | ||
![]() |
OT 40/220
240/24 P
|
40 W | No | 208.0 mm | 43.0 mm | 26.0 mm | ||
![]() |
OT 60/220
240/24 P
|
60 W | No | 208.0 mm | 43.0 mm | 26.0 mm | ||
![]() |
OT 100/220
240/24 P
|
100 W | No | 240.0 mm | 50.0 mm | 34.0 mm | ||
![]() |
OT 130/220
240/24 P
|
130 W | No | 220.0 mm | 63.0 mm | 37.0 mm | ||
![]() |
OT 250/220
240/24 P
|
250 W | No | 265.0 mm | 68.0 mm | 40.0 mm |