Digital Systems
 

CV Power supplies with DALI

Product family features
  • Dimmable via Touch DIM (if supported)
  • LED driver whose output power can be shared arbitrarily among the 2 or 4 channels
  • Dimming range: 0…100 %
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
Product family benefits
  • Intelligent power matching thanks to Smart power supply
  • Slim form factor for mounting on the cove or in linear luminaires
  • Minimized flicker thanks to high PWM frequency
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Available as Tunable White version (DALI Device Type 8)
  • DALI message detection "LED Module failure"
  • IP rating: IP20
Equipment / Accessories
  • Suitable for 24 V LED modules

Products

Sort by:
Product
Nominal output power
Dimmable
Length
Width
Height
Data sheet
OTi DALI 50/220…240/24 1…4 CH
50 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 50/220…240/24 TW
50 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 80/220…240/24 1…4 CH
80 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 80/220…240/24 TW
80 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 160/220…240/24 1-2 CH
160 W Yes 300.0 mm 50.0 mm 35.0 mm
OTi DALI 160/220…240/24 TW
160 W Yes 300.0 mm 50.0 mm 35.0 mm

Information about Family

The OSRAM constant voltage power supplies with DALI, enable you to maximize any design’s potential and enjoy flicker-free light due to a high PWM frequency, dimmable to between 0.1 and 100 % with TouchDIM. Use from 1 to 4 channels and benefit from DALI message detection of LED module failure. The slender form of these drivers makes them ideal for use when you need to install LED lighting in tight spaces or linear luminaires, for example in coves, corridors and handrails, or for wall washing. They are suitable for 24 V LED modules and for use with luminaires of protection classes I and II.
Areas of application
  • Cove lighting, wall washer, corridor, handrail
  • Suitable for use in luminaires of protection class I and II