OTi DALI 160/220-240/24 1CH G3

Product family benefits
  • Intelligent power matching thanks to Smart power supply
  • Slim form factor for mounting on the cove or in linear luminaires
  • No stroboscopic effect thanks to patented high PWM frequency management (> 2 kHz)
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Available as single-channel or multi-channel with DT6 and DT8 in one device
  • DALI message detection "LED Module failure"
  • IP rating: IP20
Areas of application
  • Cove lighting, wall washer, corridor, handrail, luminous ceilings
  • Suitable for use in luminaires of protection class I and II
Equipment / Accessories
  • Suitable for 24 V LED modules

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

50/60 Hz

Input voltage AC

198…264 V

Total harmonic distortion

< 5 %

Power factor λ

0.92C...0.99

Efficiency in full-load

93%

at 230 V, 50 Hz

Device power loss

11 W

Inrush current

57 A

Max. ECG no. on circuit breaker 10 A (B)

4

Max. ECG no. on circuit breaker 10 A (C)

8

Max. ECG no. on circuit breaker 16 A (C)

13

Max. ECG no. on circuit breaker 16 A (B)

7

Max. ECG no. on circuit breaker 25 A (B)

12

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

24 V

DC voltage

U-OUT (working voltage)

24.2 V

Nominal output power

160 W

Maximum output power

160 W

at steady state

Galvanic isolation

SELV

Galvanic isolation primary/secondary

3.75 kV

Input voltage DC

176…276 V

Output PWM frequency

> 2000 Hz

Output ripple Voltage (100 Hz)

< 1 %

Dimensions & weight

Mounting hole spacing, length

258.0 mm

Product weight

380.00 g

Cable cross-section, input side

0.5…2.5 mm²

Cable cross-section, output side

0.5…2.5 mm²

Wire preparation length, input side

6.0 mm

Wire preparation length, output side

6.0 mm

Length

300.0 mm

Height

35.0 mm

Width

50.0 mm

Colors & materials

Casing material

Plastic

Temperatures & operating conditions

Ambient temperature range

-20…+45 °C

Maximum temperature at tc test point

75 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 h

Additional product data

Predecessor EAN

4062172178006

Capabilities

Dimmable

Yes

Dimming interface

DALI-2 / Corridor / Touch DIM

Dimming range

0.1…100 %

Dimming method

Pulse Width Modulation

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Suitable for fixtures with prot. class

I / II

Type of connection, input side

Screw terminal

Type of connection, output side

Screw terminal

Number of channels

1

Control interface

DALI-2

Programming

Tuner4TRONIC

Yes

Certificates & standards

Approval marks – approval

BIS / CCC / EAC / EL / ENEC 10 / RCM / VDE / VDE-EMC

Standards

Acc. to EN 55015/Acc. to EN 60598-2-22/Acc. to EN 61000-3-2/Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 62384/Acc. to EN 62386

Protection class

II

Type of protection

IP20

Logistical data

Commodity code

850440839000

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

06-02-2023

Primary Article Identifier

4062172274388

Declaration No. in SCIP database

In work

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172274388 UNV

Unpacked

1 300mm x 50mm x 35mm 380.00g 0.53dm³
4062172274395 VS

Shipping box

20 335mm x 268mm x 167mm 7918.00g 14.99dm³

Downloads

Information about Family

Versatile - easy control for dynamic light

This driver is suitable for emergency lighting systems. The output on the multi-channel versions can be shared arbitrarily among the 2 or 4 channels and the PWM frequency > 2kHz minimizes stroboscopic effects.
Product family features
  • Dimmable via Touch DIM
  • LED driver whose output power can be shared arbitrarily among the 2 or 4 channels
  • Dimming range: 0.1…100 %
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output power
Dimmable
Length
Width
Height
Data sheet
OTi DALI 50/220-240/24 4CHDT6/8
50 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 80/220-240/24 4CHDT6/8
80 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 160/220-240/24 2CHDT6/8
160 W Yes 300.0 mm 50.0 mm 35.0 mm
OTi DALI 50/220-240/ 24 4CH DT6/8 G3
50 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 80/220-240/ 24 4CH DT6/8 G3
80 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 160/220-240/ 24 2CH DT6/8 G3
160 W Yes 300.0 mm 50.0 mm 35.0 mm
OTi DALI 50/220-240/24 1CH
50 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 80/220-240/24 1CH
80 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 160/220-240/24 1CH
160 W Yes 300.0 mm 50.0 mm 35.0 mm
OTi DALI 80/220-240/24 1CH G3
80 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 50/220-240/24 1CH G3
50 W Yes 346.0 mm 32.0 mm 22.0 mm
OTi DALI 160/220-240/24 1CH G3
160 W Yes 300.0 mm 50.0 mm 35.0 mm