CV Power supplies with DALI
Product family features
- Dimmable via Touch DIM
- Available as single-channel or multi-channel with DT6 and DT8 in one device
- Dimming range: 0.1 100 % (for 50-80-160W) or 1 100 % (for 30W)
- Line frequency: 0 Hz | 50 Hz | 60 Hz
Product family benefits
- Intelligent power matching thanks to Smart power supply
- Form factor for mounting on the cove or in luminaires
- No stroboscopic effect thanks to patented high PWM frequency management (> 2 kHz)
- Suitable for installation in emergency lighting systems according to EN 60598-2-22
- DALI message detection "LED Module failure"
- IP rating: IP20
Equipment / Accessories
- Suitable for 24 V LED modules
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
![]() |
OTi DALI 30/220-240/24 1CH
|
30 W | Yes | 103.0 mm | 67.0 mm | 29.5 mm | ||
![]() |
OTi DALI 50/220-240/24 1CH G3
|
50 W | Yes | 346.0 mm | 32.0 mm | 22.0 mm | ||
![]() |
OTi DALI 80/220-240/24 1CH G3
|
80 W | Yes | 346.0 mm | 32.0 mm | 22.0 mm | ||
![]() |
OTi DALI 160/220-240/24 1CH G3
|
160 W | Yes | 300.0 mm | 50.0 mm | 35.0 mm | ||
![]() |
OTi DALI 50/220-240/ 24 4CH DT6/8 G3
|
50 W | Yes | 346.0 mm | 32.0 mm | 22.0 mm | ||
![]() |
OTi DALI 80/220-240/ 24 4CH DT6/8 G3
|
80 W | Yes | 346.0 mm | 32.0 mm | 22.0 mm | ||
![]() |
OTi DALI 160/220-240/ 24 2CH DT6/8 G3
|
160 W | Yes | 300.0 mm | 50.0 mm | 35.0 mm | ||
![]() |
OTi DALI 50/220-240/24 1CH
|
50 W | Yes | 346.0 mm | 32.0 mm | 22.0 mm | ||
![]() |
OTi DALI 80/220-240/24 1CH
|
80 W | Yes | 346.0 mm | 32.0 mm | 22.0 mm | ||
![]() |
OTi DALI 160/220-240/24 1CH
|
160 W | Yes | 300.0 mm | 50.0 mm | 35.0 mm | ||
![]() |
OTi DALI 50/220-240/24 4CHDT6/8
|
50 W | Yes | 346.0 mm | 32.0 mm | 22.0 mm | ||
![]() |
OTi DALI 80/220-240/24 4CHDT6/8
|
80 W | Yes | 346.0 mm | 32.0 mm | 22.0 mm | ||
![]() |
OTi DALI 160/220-240/24 2CHDT6/8
|
160 W | Yes | 300.0 mm | 50.0 mm | 35.0 mm |
Information about Family
Versatile - easy control for dynamic light
This driver is suitable for emergency lighting systems. The output on the multi-channel versions can be shared arbitrarily among the 2 or 4 channels and the PWM frequency > 2kHz minimizes stroboscopic effects.
This driver is suitable for emergency lighting systems. The output on the multi-channel versions can be shared arbitrarily among the 2 or 4 channels and the PWM frequency > 2kHz minimizes stroboscopic effects.
Areas of application
- Cove lighting, wall washer, corridor, handrail, luminous ceilings
- Suitable for use in luminaires of protection class I and II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.