OTi DALI 30/220-240/24 1CH

Product family benefits

Intelligent power matching thanks to Smart power supply
Form factor for mounting on the cove or in luminaires
No stroboscopic effect thanks to patented high PWM frequency management (> 2 kHz)
Suitable for installation in emergency lighting systems according to EN 60598-2-22
DALI message detection "LED Module failure"
IP rating: IP20

Areas of application

Cove lighting, wall washer, corridor, handrail, luminous ceilings
Suitable for use in luminaires of protection class I and II

Equipment / Accessories

Suitable for 24 V LED modules

Data sheet

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

50/60 HZ Hz

Input voltage AC

198…264 V

Total harmonic distortion

< 10 %

Power factor λ

0.32…0.95

Efficiency in full-load

> 88 %

Device power loss

4.5 W

Networked standby power

<0.50 W

Inrush current

40 A

Max. ECG no. on circuit breaker 10 A (C)

Max. ECG no. on circuit breaker 10 A (B)

Max. ECG no. on circuit breaker 16 A (B)

Max. ECG no. on circuit breaker 16 A (C)

Max. ECG no. on circuit breaker 25 A (B)

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

24.2 V

U-OUT (working voltage)

24.2 V

Nominal output power

30 W

Maximum output power

30 W

Galvanic isolation

SELV

Output PWM frequency

> 3000 Hz

Output ripple Voltage (100 Hz)

< 1 %

Input voltage DC

176…276 V

Dimensions & weight

Mounting hole spacing, length

94.0 mm

Product weight

155.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

7.0 mm

Wire preparation length, output side

7.0 mm

Mounting hole spacing, width

58.0 mm

Length

103.0 mm

Width

67.0 mm

Height

29.5 mm

Colors & materials

Casing material

Plastic

Temperatures & operating conditions

Ambient temperature range

-20…+45 °C

Maximum temperature at tc test point

80 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Lifespan

ECG lifetime

50000 h

Capabilities

Dimmable

Yes

Dimming interface

DALI

Dimming range

0.1…100 %

Dimming method

Pulse Width Modulation

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

Suitable for fixtures with prot. class

I / II

Type of connection, input side

Plug-in connection

Type of connection, output side

Plug-in connection

Number of channels

Control interface

DALI-2

Programming

Tuner4TRONIC

Yes

Certificates & standards

Approval marks – approval

CE / CCC / BIS / ENEC / EL / ENEC 25 / RCM / UKCA

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 60598-2-22/Acc. to EN 62386/Acc. to EN 55015

Protection class

Type of protection

IP20

Logistical data

Commodity code

850440839000

Environmental information

Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

19-05-2023

Primary Article Identifier

4062172329767

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

00655979-2845-4498-83fd-fa3355affbc4

Packaging information

EAN	Unit	Piece	Dimension l x w x h	Weight	Volume
4062172329767	UNV Unpacked	1
4062172329774	VS Shipping box	30	355mm x 225mm x 130mm	5092.00g	10.38dm³

Downloads

Data sheets

Family data sheet

Data sheet

Information about Family

Versatile - easy control for dynamic light

This driver is suitable for emergency lighting systems. The output on the multi-channel versions can be shared arbitrarily among the 2 or 4 channels and the PWM frequency > 2kHz minimizes stroboscopic effects.

Product family features

Dimmable via Touch DIM
Available as single-channel or multi-channel with DT6 and DT8 in one device
Dimming range: 0.1…100 % (for 50-80-160W) or 1…100 % (for 30W)
Line frequency: 0 Hz | 50 Hz | 60 Hz

Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product	Nominal output power	Dimmable	Length	Width	Height
OTi DALI 30/220-240/24 1CH	30 W	Yes	103.0 mm	67.0 mm	29.5 mm
OTi DALI 50/220-240/24 1CH G3	50 W	Yes	346.0 mm	32.0 mm	22.0 mm
OTi DALI 80/220-240/24 1CH G3	80 W	Yes	346.0 mm	32.0 mm	22.0 mm
OTi DALI 160/220-240/24 1CH G3	160 W	Yes	300.0 mm	50.0 mm	35.0 mm
OTi DALI 50/220-240/ 24 4CH DT6/8 G3	50 W	Yes	346.0 mm	32.0 mm	22.0 mm
OTi DALI 80/220-240/ 24 4CH DT6/8 G3	80 W	Yes	346.0 mm	32.0 mm	22.0 mm
OTi DALI 160/220-240/ 24 2CH DT6/8 G3	160 W	Yes	300.0 mm	50.0 mm	35.0 mm
OTi DALI 50/220-240/24 1CH	50 W	Yes	346.0 mm	32.0 mm	22.0 mm
OTi DALI 80/220-240/24 1CH	80 W	Yes	346.0 mm	32.0 mm	22.0 mm
OTi DALI 160/220-240/24 1CH	160 W	Yes	300.0 mm	50.0 mm	35.0 mm
OTi DALI 50/220-240/24 4CHDT6/8	50 W	Yes	346.0 mm	32.0 mm	22.0 mm
OTi DALI 80/220-240/24 4CHDT6/8	80 W	Yes	346.0 mm	32.0 mm	22.0 mm
OTi DALI 160/220-240/24 2CHDT6/8	160 W	Yes	300.0 mm	50.0 mm	35.0 mm