ELEMENT 60/220-240/24 G2
Product family benefits
- High efficiency (up to 91 %)
- Higher quality of light thanks to < 3% output ripple current
- Excellent price/performance ratio
- Class II design for wide application
- 3 years guarantee
Areas of application
- Decorative lighting in hospitality, restaurants and Shops
- Shelf lighting
- Cove lighting
- Under cabinet lighting
References / Links
For more information on the multi-level guarantee and the terms and conditions of the guarantee visit https://www.inventronics-light.com/multilevel-guarantees
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
50…60 Hz
Input voltage AC
198…264 V
Power factor λ
0.95
Efficiency in full-load
88 %
Device power loss
8.2 W
Inrush current
< 25 A
Max. ECG no. on circuit breaker 10 A (C)
16
Max. ECG no. on circuit breaker 10 A (B)
10
Max. ECG no. on circuit breaker 16 A (C)
26
Max. ECG no. on circuit breaker 16 A (B)
15
Max. ECG no. on circuit breaker 25 A (B)
24
Surge capability (L-N)
1 kV
Nominal output voltage
24 V
Nominal output power
60 W
Maximum output power
60 W
Galvanic isolation primary/secondary
3 kV
Output ripple Voltage (100 Hz)
< 3 %
Dimensions & weight
Mounting hole spacing, length
192 mm
Product weight
296.00 g
Cable cross-section, input side
0.75…1.5 mm²
Cable cross-section, output side
0.75…1.5 mm²
Wire preparation length, input side
5.0 mm
Length
200.0 mm
Height
31.0 mm
Width
40.0 mm
Colors & materials
Casing material
Plastic
Temperatures & operating conditions
Ambient temperature range
-20…+50 °C
Maximum temperature at tc test point
85 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-40…+85 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
30000 h
Additional product data
Predecessor EAN
4052899528680, 4052899463790
Capabilities
Dimmable
No
Overheating protection
Yes
Overload protection
Yes
Short-circuit protection
Yes
Intended for no-load operation
No
Suitable for fixtures with prot. class
I / II
Number of channels
1
Certificates & standards
Approval marks – approval
CE / RCM / CCC / MM
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to CISPR 15/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Type of protection
IP20
Logistical data
Commodity code
850440839000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
19-10-2022
Primary Article Identifier
4052899605527
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
9094d77e-5439-4549-8aef-7667bfd9f7fe
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4052899605527 |
UNV
| 1 | 200mm x 40mm x 31mm | 296.00g | 0.25dm³ |
| 4052899605534 |
VS
| 30 | 421mm x 225mm x 141mm | 9493.00g | 13.36dm³ |
Downloads
Data sheets
Information about Family
Budget-friendly - solid quality at a good price
These drivers are perfect for standard applications but also allow flexibility in installation due to their compact design. A high efficiency of up to 91% and a lifetime of up to 30.000 h underline the excellent ration between price and performance of this device.
These drivers are perfect for standard applications but also allow flexibility in installation due to their compact design. A high efficiency of up to 91% and a lifetime of up to 30.000 h underline the excellent ration between price and performance of this device.
Product family features
- Linear form factor
- Power factor: >0.95 at full load
- Total Harmonic Distortion (THD): < 15%
- Output voltage tolerance: < 3%
- Up to 30,000 h @ Tc max / up to 50,000 h @ Tc -10 °C
- Lifetime: up to 30,000 h (temperature at max. tc )
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
ELEMENT 30/220-240/24 G2
|
30 W | No | 145.0 mm | 40.0 mm | 26.5 mm | ||
|
|
ELEMENT 60/220-240/24 G2
|
60 W | No | 200.0 mm | 40.0 mm | 31.0 mm | ||
|
ELEMENT 120/220-240/24 G2
|
120 W | No | 260.0 mm | 40.0 mm | 31.0 mm | ||
|
ELEMENT 180/220-240/24 G2
|
180 W | No | 300.0 mm | 40.0 mm | 31.0 mm |