ELEMENT 44/220 240/1050 S
- Compatible with LEDs with Chip-On-Board technology and discrete LEDs
- High efficiency
- Simple installation and wiring
- Spotlight and downlight installations for shops
- Recessed luminaires
- Suitable for luminaires of protection classes I and II
- Suitable for indoor SELV installations
Technical Data
Electrical data
Nominal input voltage
220 240 V
Mains frequency
50 60 Hz
Input voltage AC
198 264 V
Total harmonic distortion
< 20 %
Power factor λ
0.95
Efficiency in full-load
90 %
Device power loss
5.7 W
Protective conductor current
<0.7 mA
Inrush current
< 11 A
Max. ECG no. on circuit breaker 10 A (C)
-
Max. ECG no. on circuit breaker 10 A (B)
18
Max. ECG no. on circuit breaker 16 A (C)
-
Max. ECG no. on circuit breaker 16 A (B)
29
Max. ECG no. on circuit breaker 25 A (B)
-
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
30 42 V
U-OUT (working voltage)
60 V
Nominal output current
1050 mA
Output current tolerance
±7.5 %
Output ripple current (100 Hz)
< 30 %
Output PSTLM
≤1
Output SVM
≤0.8
Nominal output power
28.3 42 W
Maximum output power
42 W
Galvanic isolation
SELV
Galvanic isolation primary/secondary
SELV
Current set
Fixed current
Dimensions & weight
Mounting hole spacing, length
88.0 mm
Mounting hole spacing, width
34.0 mm
Product weight
88.00 g
Cable cross-section, input side
0.5 1.5 / 0.75 1.5 mm²
Cable cross-section, output side
0.5 1.5 / 0.75 1.5 mm²
Wire preparation length, input side
7 8 mm
Wire preparation length, output side
7 8 mm
Width
43.0 mm
Height
29.0 mm
Length
97.0 mm
Colors & materials
Casing material
Plastic
Temperatures & operating conditions
Ambient temperature range
-20 +50 °C
Maximum temperature at tc test point
85 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-40 +85 °C
Permitted rel. humidity during operation
5 95 %
Lifespan
ECG lifetime
30000 / 50000 h
Additional product data
Successor EAN
4062172167611
Predecessor EAN
4052899947122
Capabilities
Dimmable
No
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I / II
Type of connection, input side
Push terminal
Type of connection, output side
Push terminal
Number of channels
1
Suitable for through-wiring
No
Certificates & standards
Approval marks approval
ENEC 05 / CCC / RCM / CE
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61547/Acc. to IEC 61000-3-3
Type of protection
IP20
Protection class
II
Logistical data
Commodity code
850440839000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
21-09-2022
Primary Article Identifier
4052899553057
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
e10a781e-3beb-4dc3-b862-bfa2242fdfc0
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4052899553057 |
UNV
| 1 | 97mm x 43mm x 29mm | 88.00g | 0.12dm³ |
4052899553064 |
VS
| 50 | 232mm x 212mm x 190mm | 4685.00g | 9.34dm³ |
Downloads
Data sheets
Information about Family
The integrated cable clamp provides a solution for built-in and independent installations and contributes to the simplicity of installing and operating this compact driver. Due to a wide variety of wattages and output currents this product is able to meet various needs.
- Available with wattages up to 44 W
- Constant output current
- Integrated cable clamp for luminaire and independent installation
- Operated with Safety extra-low voltage (SELV): < 60 V
- Reversible overtemperature, overload, short-circuit and open-circuit protection
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
![]() |
ELEMENT 44/220
240/1050 S
|
30 42 V | 1050 mA | 97.0 mm | 43.0 mm | 29.0 mm |