ELEMENT 55/220…240/1200 CS L
Product family benefits
- Small housing design
- Flexible current setting (DIPswitch – 4 currents)
- Enhanced safety due to overload, overtemperature, short-circuit protection
Areas of application
- Linear lighting for office, school and public areas
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
50/60 Hz
Input voltage AC
198…264 V
Current set
DipSwitch
Power factor λ
0.98
Efficiency in full-load
89 %
Device power loss
7.0 W
Inrush current
12.5 A
Max. ECG no. on circuit breaker 10 A (B)
25
Max. ECG no. on circuit breaker 10 A (C)
25
Max. ECG no. on circuit breaker 16 A (B)
40
Max. ECG no. on circuit breaker 16 A (C)
40
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
23…51 V
Nominal output current
920 / 1050 / 1075 / 1200 mA
Output ripple current (100 Hz)
< 30 %
Output PSTLM
≤1
Output SVM
≤0.7
Nominal output power
21…61 W
Maximum output power
61 W
Galvanic isolation
SELV
Total harmonic distortion
< 20 %
U-OUT (working voltage)
< 60 V
Output current tolerance
±7.5 %
Default output current
1200 mA
Dimensions & weight
Mounting hole spacing, length
200.0 mm
Product weight
145.00 g
Cable cross-section, input side
0.5…1.5 / 0.75…1.5 mm²
Cable cross-section, output side
0.5…1.5 / 0.75…1.5 mm²
Wire preparation length, input side
8.5…9.5 mm
Width
30.0 mm
Wire preparation length, output side
8.5…9.5 mm
Height
21.0 mm
Length
210.0 mm
Colors & materials
Casing material
Metal
Temperatures & operating conditions
Ambient temperature range
-20…+50 °C
Maximum temperature at tc test point
80 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-40…+85 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
35000 / 50000 h
Capabilities
Dimmable
No
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I
Number of channels
1
Programming
Programming device
DIPswitch
Certificates & standards
Approval marks – approval
CE / ENEC 05 / EAC / BIS / RCM / CCC
Standards
Acc. to IEC 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 61547
Type of protection
IP20
Logistical data
Commodity code
850440839000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
25-04-2022
Primary Article Identifier
4052899553156
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
d7e6dbbb-edc2-4340-a66e-93c60cf8297c
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4052899553156 |
UNV
| 1 | |||
| 4052899553163 |
VS
| 20 | 228mm x 138mm x 160mm | 3178.00g | 5.03dm³ |
Downloads
Information about Family
Perfect price/feature ratio - standard lighting needs for basic pricing.
The ELEMENT SELV driver comes in small housing of only 210 mm and offers a high efficiency of up to 90% and flexibility in current setting by DIPSwitch (4). It is an optimized price/performance driver solution.
The ELEMENT SELV driver comes in small housing of only 210 mm and offers a high efficiency of up to 90% and flexibility in current setting by DIPSwitch (4). It is an optimized price/performance driver solution.
Product family features
- Line frequency: 50 Hz | 60 Hz
- Supply voltage: 220…240 V
- Lifetime: up to 50,000 h (temperature at Tc max. = -10 °C, max 10% failure rate)
- SELV driver
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
ELEMENT 35/220…240/800 CS L
|
23…51 V | 500 / 600 / 700 / 800 mA | 210.0 mm | 30.0 mm | 21.0 mm | ||
|
|
ELEMENT 55/220…240/1200 CS L
|
23…51 V | 920 / 1050 / 1075 / 1200 mA | 210.0 mm | 30.0 mm | 21.0 mm |
