ET-PARROT

Product family features
  • Line frequency: 50…60 Hz
  • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022
  • Line harmonics according to EN 61000-3-2
  • Immunity according to EN 61547
  • Safety: to EN 61347
  • Short-circuit protection, overload protection, overtemperature protection: electronically reversible
  • Electrical isolation between the primary side and the secondary side
  • Dimmable on the leading edge and trailing edge
Product family benefits
  • Very low power loss thanks to high efficacy
  • Protective operation throughout the entire partial-load range for long lamp life

Products

Sort by:
Product
Nominal voltage
Width
Height
Dimmable
Lamp wattage
Data sheet
ET-PARROT 70/220…240 I
220…240 V 38.0 mm 31.0 mm Yes 20…70 W
ET-PARROT 70/220…240 I
220…240 V 38.0 mm 31.0 mm Yes 20…70 W
ET-PARROT 105/220…240 I
220…240 V 38.0 mm 31.0 mm Yes 35…105 W
ET-PARROT 105/220…240 I
220…240 V 38.0 mm 31.0 mm Yes 35…105 W

Information about Family

ET-PARROT is an electronic transformer that is dimmable on both the leading and trailing edge. It gives you overload, short-circuit and overtemperature protection that is electronically reversible, and electrical isolation between the primary and secondary sides. It does not permit switching between the transformer and the lamp. The ET-PARROT provides safety to EN 61347, and you are likely to find it particularly useful for effect and accent lighting, object lighting, surface-mounted and recessed furniture luminaires and the illumination of a range of spaces including living rooms, conference rooms and event rooms, as well as for restaurant lighting and shoplighting. The efficiency of this unit means very little power loss, and it gives you protective operation throughout the entire partial-load range, for extended lamp life.
Areas of application
  • Effect and accent lighting
  • Living rooms
  • Object lighting
  • Conference rooms
  • Restaurants
  • Recessed and surface-mounted furniture luminaires
  • Shop lighting
  • Event rooms
Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads