GINOLED Flex DIFFUSE Top - Monowhite

Product family features
  • 3 SDCM, CRI80
  • Large selection of lighting color temperatures
  • 110° viewing angle per module
  • Up to 50,000 h lifetime @ tc max
  • Dimmable with PWM technology
Product family benefits
  • Cut to length each 41.7 mm
  • 10x10 mm super slim design, fit for embedded applications
  • Diffuse version, top emitting, high light uniformity without spot or dark area
  • IP67 protection for truly outdoor application

Products

Sort by:
Product
Light color (designation)
Color temperature
Color rendering index Ra
Luminous flux per meter
Nominal wattage per meter
Data sheet
GFDT400-G1 827-01
2700 K 2700 K 80 420 lm 6.0 W
GFDT400-G1 827-05
2700 K 2700 K 80 2100 lm 6.0 W
GFDT400-G1 830-01
3000 K 3000 K 80 420 lm 6.0 W
GFDT400-G1 830-05
3000 K 3000 K 80 2100 lm 6.0 W
GFDT400-G1 835-01
3500 K 3500 K 80 450 lm 6.0 W
GFDT400-G1 835-05
3500 K 3500 K 80 2250 lm 6.0 W
GFDT400-G1 840-01
4000 K 4000 K 80 450 lm 6.0 W
GFDT400-G1 840-05
4000 K 4000 K 80 2250 lm 6.0 W
GFDT400-G1 850-01
5000 K 5000 K 80 440 lm 6.0 W
GFDT400-G1 850-05
5000 K 5000 K 80 2200 lm 6.0 W
GFDT400-G1 857-01
5700 K 5700 K 80 435 lm 6.0 W
GFDT400-G1 857-05
5700 K 5700 K 80 2175 lm 6.0 W
GFDT800-G1 827-01
2700 K 2700 K 80 790 lm 11.0 W
GFDT800-G1 827-05
2700 K 2700 K 80 790 lm 11.0 W
GFDT800-G1 830-01
3000 K 3000 K 80 790 lm 11.0 W
GFDT800-G1 830-05
3000 K 3000 K 80 790 lm 11.0 W
GFDT800-G1 835-01
3500 K 3500 K 80 820 lm 11.0 W
GFDT800-G1 835-05
3500 K 3500 K 80 820 lm 11.0 W
GFDT800-G1 840-01
4000 K 4000 K 80 820 lm 11.0 W
GFDT800-G1 840-05
4000 K 4000 K 80 820 lm 11.0 W
GFDT800-G1 850-01
5000 K 5000 K 80 785 lm 11.0 W
GFDT800-G1 850-05
5000 K 5000 K 80 765 lm 11.0 W
GFDT800-G1 857-01
5700 K 5700 K 80 760 lm 11.0 W
GFDT800-G1 857-05
5700 K 5700 K 80 760 lm 11.0 W

Information about Family

Areas of application
  • Outdoor and indoor contour lighting
  • Signage
  • Cove lighting
  • Decorative lighting
  • Architectural lighting
  • Accent lighting
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads