IT DALI 110/120 240/1A0 P7
- Versatile DALI driver due to flexible output characteristic
- Fully programmable via T4T software (DALI / AstroDIM / Constant Lumen)
- Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
- High efficiency
- High surge protection: up to 10 kV
- IP rating: IP67 (Independent installation)
- High efficiency and reliability
- 5 years guarantee
- Industry lighting
- Street and urban lighting
- Suitable for use in outdoor luminaires of protection class I and II
References / Links
* For more information on the multi-level guarantee and the terms and conditions of the guarantee visit https://www.inventronics-light.com/multilevel-guarantees
Technical Data
Electrical data
Nominal voltage
120 240 V
Input voltage AC
120...264 V
Nominal current
0.53 A
Mains frequency
50/60 Hz
Power factor λ
0.84C...0.99
Total harmonic distortion
< 10 %
Device power loss
9.0 W
Networked standby power
<0.50 W
Inrush current
66 A
Max. ECG no. on circuit breaker 10 A (B)
9
Max. ECG no. on circuit breaker 16 A (B)
14
Max. ECG no. on circuit breaker 25 A (B)
22
Surge capability (L/N-Ground)
10 kV
Surge capability (L-N)
6 kV
Nominal output power
110 W
Maximum output power
110 W
Efficiency in full-load
93 %
Nominal output current
350 1050 mA
Default output current
700 mA
Output current tolerance
±5 %
Output ripple current (100 Hz)
+/- 5 %
Output PSTLM
≤1
Output SVM
≤0.4
Minimum output current
70 mA
Galvanic isolation
Double
Max. no. of ECGs on 16A MCB with EBN-OS
30
Nominal output voltage
75...157 V
U-OUT (working voltage)
180 V
Dimensions & weight
Length
176.0 mm
Width
61.5 mm
Height
39.5 mm
Mounting hole spacing, length
163.0 mm
Mounting hole spacing, width
38 mm
Product weight
650.00 g
Cable cross-section, input side
1.0 mm²
Cable cross-section, output side
1.0 mm²
Wire preparation length, input side
10 mm
Temperatures & operating conditions
Ambient temperature range
-40 +60 °C
Temperature range at storage
-40 +85 °C
Maximum temperature at tc test point
85 °C
Max.housing temperature in case of fault
120 °C
Permitted rel. humidity during operation
5 95 %
Lifespan
ECG lifetime
50000 / 100000 h
Capabilities
Dimmable
Yes
Dimming interface
DALI-2 / AstroDIM
Dimming range
10 100 %
Suitable for fixtures with prot. class
I / II
Constant lumen function
Programmable
NTC input
No
Short-circuit protection
Yes
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
DALI-2 Energy Data
Yes
LEDset
No
Number of channels
1
DALI-2 Diagnostic Data
Yes
Overload protection
Yes
Programming
Box programming
No
Programming device
DALI
Tuner4TRONIC Field App
No
Tuner4TRONIC
Yes
Programmable features
Constant Lumen
Yes
Driver Guard
No
AstroDIM
Yes
StepDIM
No
MainsDIM
No
Emergency Mode
No
Configuration Lock
Yes
DALI-2 Luminaire Data
Yes
Certificates & standards
Type of protection
IP67
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1 (ED.8)/Acc. to EN 62384
Approval marks approval
CCC / CE / TISI / RCM / ENEC / UKCA / DALI-2 / IP67
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
22-05-2023
Primary Article Identifier
4052899620339
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
48a8586f-acc2-4e93-86c9-97154d1cccb3
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4052899620339 |
UNV
| 1 | 176mm x 62mm x 40mm | 650.00g | 0.43dm³ |
4052899620445 |
VS
| 15 | 449mm x 252mm x 163mm | 10412.00g | 18.44dm³ |
Downloads
Accessories optional
Information about Family
- Available with different wattage: 20 W, 40 W, 75 W, 110 W, 150 W, 200 W, 240 W
- AstroDim functionality
- Constant Lumen Output (CLO)
- DALI-2 certified (Part 251, 252, 253)
- DALI dimming (min.10%)
- Output current range 350 1050 mA
- Supply voltage: 120 240 V
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|
IT DALI 20/120...240/1A0 P7
|
350 1050 mA | 138.0 mm | 82.5 mm | 38.0 mm | |||
IT DALI 40/120
240/1A0 P7
|
350 1050 mA | 138.0 mm | 82.5 mm | 38.0 mm | |||
IT DALI 75/120
240/1A0 P7
|
350 1050 mA | 167.0 mm | 61.5 mm | 39.5 mm | |||
IT DALI 110/120
240/1A0 P7
|
350 1050 mA | 176.0 mm | 61.5 mm | 39.5 mm | |||
IT DALI 150/120
240/1A0 P7
|
350 1050 mA | 184.0 mm | 61.5 mm | 39.5 mm | |||
IT DALI 200/120
240/1A0 P7
|
350 1050 mA | 226.0 mm | 61.5 mm | 39.5 mm | |||
IT DALI 240/120-240/1A0 P7
|
350 1050 mA | 252.0 mm | 61.5 mm | 39.5 mm |