IT FIT 15/220…240/700 CS I

Product family benefits
  • Small housing for flexible luminaire designs
  • Flexible current selection via DIP switch
  • Reversible overtemperature, overload, short-circuit and open-circuit protection
Areas of application
  • Extra small design for downlights, spotlights and other indoor luminaries
  • Suitable for luminaires of protection classes I and II
  • Suitable for indoor SELV installations
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

50/60 Hz

Input voltage AC

198…264 V

Safety voltage range

Total harmonic distortion

< 10 %

At full load, 230 V, 50 Hz / see graphs

Power factor λ

0.95

Full load at 230 V/50 Hz

Efficiency in full-load

86 %

at 230 V, 50 Hz

Protective conductor current

<0.7 mA

Inrush current

< 10 A

Max. ECG no. on circuit breaker 10 A (C)

51

Max. ECG no. on circuit breaker 10 A (B)

51

Max. ECG no. on circuit breaker 16 A (C)

82

Max. ECG no. on circuit breaker 16 A (B)

82

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

11…21 V

U-OUT (working voltage)

60 V

Nominal output current

550 / 600 / 650 / 700 mA

±7.5%

Output current tolerance

±7.5 %

Default output current

700 mA

Output ripple current (100 Hz)

< 5 %

Ripple average at 100 Hz

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

6.05…14.7 W

Maximum output power

14.7 W

Galvanic isolation

SELV

Current set

DipSwitch

Dimensions & weight

Mounting hole spacing, length

89.4 mm

Mounting hole spacing, width

22.0 mm

Product weight

56.00 g

Cable cross-section, input side

0.5…1.5 / 0.75…1.5 mm²

Solid/ Flexible Leads

Cable cross-section, output side

0.5…1.5 / 0.75…1.5 mm²

Solid/ Flexible Leads

Wire preparation length, input side

7…8 mm

Wire preparation length, output side

7…8 mm

Height

26.0 mm

Width

30.0 mm

Length

104.0 mm

Colors & materials

Casing material

Plastic

Temperatures & operating conditions

Ambient temperature range

-20…+50 °C

Maximum temperature at tc test point

80 °C

Measured on tc point indicated on the product label.

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 h

At maximum Tc = 70°C / 10% failure rate

Additional product data

Encapsulated

No

Capabilities

Dimmable

No

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Suitable for fixtures with prot. class

I / II

Type of connection, input side

Push terminal

Type of connection, output side

Push terminal

Number of channels

1

Control interface

-

Programming

Programming device

DIPswitch

Certificates & standards

Approval marks – approval

ENEC 05 / CCC / CE / RCM

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Type of protection

IP20

Logistical data

Commodity code

850440829000

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172199322 UNV

Unpacked

1 1120.00g
4062172199339 VS

Shipping box

20 220mm x 162mm x 75mm 1205.00g 2.67dm³

Downloads

Information about Family

Product family features
  • Supply voltage: 220…240 V
  • Line frequency: 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • According to EN 61347-1, 61347-2-13, 62384
  • RI suppression according to CISPR 15
  • Line harmonics according to IEC 61000-3-2
  • Immunity according to IEC 61547
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
IT FIT 4/220…240/400 CS I
2.5…10 V 100 / 200 / 300 / 400 mA 104.0 mm 30.0 mm 26.0 mm
IT FIT 7/220…240/700 CS I
2.5…11 V 350 / 400 / 450 / 500 / 550 / 600 / 650 / 700 mA 104.0 mm 30.0 mm 26.0 mm
IT FIT 11/220…240/500 CS I
11…21 V 350 / 400 / 450 / 500 mA 104.0 mm 30.0 mm 26.0 mm
IT FIT 15/220…240/700 CS I
11…21 V 550 / 600 / 650 / 700 mA 104.0 mm 30.0 mm 26.0 mm