ICUTRONIC IT FIT D CS L (non-isolated)

Product family features
  • Output current: 200/250/300/350 mA
  • Low THD <15% @ full load
  • Output power: 5 W - 18.9 W
  • Input voltage: 220 – 240 VAC
  • Ambient temp range ta: -25 to +50 °C
  • Wide output voltage range
  • Low LF-ripple < 5%
  • Very high efficiency up to 87%
  • Fixed output (no dimming)
  • 5 years guarantee*
Product family benefits
  • Flexible with 1 driver offers 4 output currents
  • High quality light with very low ripple
  • Very high efficiency up to 87%
  • Enable slim fixture design with flat 21 mm height metal housing
  • Long lasting and high reliability
  • Non-isolated driver

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
IT FIT 18/220...240/350 CS D L
23…54 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
IT FIT 40/220...240/350 CS D L
40…120 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
IT FIT 60/220...240/350 CS D L
90…175 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
IT FIT 75/220...240/550 CS D L
90…216 V 350 / 400 / 500 / 550 mA 210.0 mm 30.0 mm 21.0 mm

Information about Family

Areas of application
  • Linear and area lighting
  • Office, industrial and shop lighting
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads