Digital Systems
 

IT FIT 40/220...240/350 CS D L

Product family benefits
  • Flexible with 1 driver offers 4 output currents
  • High quality light with very low ripple
  • Very high efficiency up to 93%
  • Enable slim fixture design with flat 21 mm height metal housing
  • Long lasting and high reliability
  • Non-isolated driver
Areas of application
  • Linear and area lighting
  • Office, industrial and shop lighting
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

50/60 Hz

Input voltage AC

198…264 V

Current set

DipSwitch

Power factor λ

≥ 0.98

ECG efficiency

92 %

Full load, 220 – 240 V, 50 Hz

Device power loss

3.65 W

At 230 V, Input power 22 W max.

Inrush current

21.7 A

twidth = 220 µs (measured at 50 % Ipeak)

Max. ECG no. on circuit breaker 10 A (C)

33

Max. ECG no. on circuit breaker 10 A (B)

22

Max. ECG no. on circuit breaker 16 A (C)

54

Max. ECG no. on circuit breaker 16 A (B)

34

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

40…120 V

Nominal output current

200 / 250 / 300 / 350 mA

±7.5%

Output ripple current (100 Hz)

< 5 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

8...42 W

Dimensions & weight

Mounting hole spacing, length

200.0 mm

Product weight

122.50 g

Cable cross-section, input side

0.5…1.5 / 0.75…1.5 mm²

Solid/ Flexible Leads

Cable cross-section, output side

0.5…1.5 / 0.75…1.5 mm²

Solid/ Flexible Leads

Wire preparation length, input side

7…8 mm

Length

210.0 mm

Height

21.0 mm

Width

30.0 mm

Temperatures & operating conditions

Ambient temperature range

-25…+50 °C

Maximum temperature at tc test point

70 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-25…80 °C

Permitted rel. humidity during operation

5…85 %

Non-condensing

Lifespan

ECG lifetime

50000 h

Tc = 70°C, with max. 10% failure rate

Additional product data

Encapsulated

Yes

Capabilities

Dimmable

No

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Max. cable length to lamp/LED module

2.0 m

Suitable for fixtures with prot. class

I / II

Number of channels

1

Certificates & standards

Approval marks – approval

CCC / CE / ENEC

In preparation

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Type of protection

IP20

Logistical data

Commodity code

850440829000

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899617391 UNV

Unpacked

1
4052899617858 VS

Shipping box

20 375mm x 230mm x 88mm 2940.00g 7.59dm³

Downloads

Information about Family

Product family features
  • Output current: 350/400/500/550 mA
  • Low THD <15% @ full load
  • Output power: 5 W – 75 W
  • Input voltage: 220 – 240 VAC
  • Ambient temp range ta: -25 to +50 °C
  • Wide output voltage range
  • Low LF-ripple < 5%
  • Very high efficiency up to 93%
  • Fixed output (no dimming)
  • Lifetime: up to 50,000 h

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
IT FIT 18/220...240/350 CS D L
23…54 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
IT FIT 40/220...240/350 CS D L
40…120 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
IT FIT 60/220...240/350 CS D L
90…175 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
IT FIT 75/220...240/550 CS D L
90…216 V 350 / 400 / 500 / 550 mA 210.0 mm 30.0 mm 21.0 mm