ETi DALI 35/220 240/700 LT2 L
- Versatile SELV DALI driver up to 75 W due to flexible output characteristic
- Fully programmable via software (DALI Interface)
- Flexible current setting (RSet)
- Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
- High-quality dimming of 10 100 % by amplitude dimming
- No TouchDIM nor Corridor Function
- High quality of light thanks to <3% output ripple current
- High efficiency
- Low standby consumption ≤ 0.5 W
- Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
- Linear and area lighting
- Linear lighting for office, education, industry, storage areas and retail
- Installation in emergency lighting systems according to IEC 61347-2-13, appendix J, except those used in high-risk task areas, i.e. those systems must not be used in workplaces where operators and other occupants of the premises are involved in potentially dangerous processes or situations.
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Nominal input voltage
220 240 V
Mains frequency
0/50/60 Hz
Input voltage AC
198 264 V
Input voltage DC
176 276 V
Current set
DALI / Rset / Programmable
Total harmonic distortion
< 20 %
Power factor λ
> 0.95
Efficiency in full-load
86 %
Device power loss
4.0 W
Inrush current
≤ 10 A
Max. ECG no. on circuit breaker 10 A (B)
21
Max. ECG no. on circuit breaker 10 A (C)
-
Max. ECG no. on circuit breaker 16 A (C)
-
Max. ECG no. on circuit breaker 16 A (B)
35
Max. ECG no. on circuit breaker 25 A (B)
-
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
20 51 V
U-OUT (working voltage)
< 60 V
Nominal output current
350 700 mA
Default output current
350 mA
Output current tolerance
±7 %
Output ripple current (100 Hz)
< 3 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
7.0 35.7 W
Maximum output power
35.7 W
Galvanic isolation
SELV
Networked standby power
<0.50 W
Power loss in stand-by mode
<0.5 W
Dimensions & weight
Mounting hole spacing, length
270.0 mm
Product weight
170.00 g
Cable cross-section, input side
0.5 1.5 mm²
Cable cross-section, output side
0.5 1.5 mm²
Wire preparation length, input side
8.0 9.0 mm
Wire preparation length, output side
8.0 9.0 mm
Height
21.0 mm
Width
30.0 mm
Length
280.0 mm
Colors & materials
Casing material
Metal
Temperatures & operating conditions
Ambient temperature range
-25 +50 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-40 +85 °C
Permitted rel. humidity during operation
5 85 %
Lifespan
ECG lifetime
100000 / 50000 h
Capabilities
Programming interface
Rset
Dimmable
Yes
Dimming interface
DALI-2
Dimming range
10 100 %
Dimming method
Full analogue dimming
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I
Type of connection, input side
Push terminal
Type of connection, output side
Push terminal
Control interface
DALI
Constant lumen function
Programmable
Number of channels
1
DALI-2 Diagnostic Data
No
DALI-2 Energy Data
No
Programming
Programming device
DALI magic
Tuner4TRONIC Field App
Yes
Programmable features
DALI-2 Luminaire Data
No
Certificates & standards
Approval marks approval
CE / ENEC 05 / EL / EAC / CCC / BIS / RCM
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 62386/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Type of protection
IP20
Logistical data
Commodity code
850440839000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
18-10-2022
Primary Article Identifier
4062172126236
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
3bbf006f-ead9-4fcd-be8b-481a0f1fa31e
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4062172126236 |
UNV
| 1 | 280mm x 30mm x 21mm | 170.00g | 0.18dm³ |
4062172126243 |
VS
| 20 | 303mm x 159mm x 105mm | 3527.00g | 5.06dm³ |
Downloads
Data sheets
Information about Family
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Versatile scope of application due to output power range of up to 71.4 W
- Supply voltage: 220 240 V
- Available with output current range: up to 1,400 mA
- SELV driver
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|---|
![]() |
ETi DALI 25/220...240/500 LT2 L
|
20 51 V | 180...500 mA | 280.0 mm | 30.0 mm | 21.0 mm | ||
![]() |
ETi DALI 35/220
240/700 LT2 L
|
20 51 V | 350 700 mA | 280.0 mm | 30.0 mm | 21.0 mm | ||
![]() |
ETi DALI 75/220...240/1A4 LT2 L
|
20 51 V | 600 1400 mA | 280.0 mm | 30.0 mm | 21.0 mm |