LINEARlight FLEX POWER

Product family features
  • Flexible and cuttable LED strip
  • Dimmable with PWM technology
Product family benefits
  • Color uniformity better than 2 SDCM on the entire LED strip and between strips
  • Large selection of light colors
  • Easy mounting on many smooth surfaces thanks to self-adhesive tape at the back
  • Pre-wired LED strip, simple and quick plug-and-play installation
Equipment / Accessories
  • Simplified connection with optional matching CONNECTsystem
  • Quick installation with optional SLIM TRACK System
  • Perfectly matched to OPTOTRONIC 24 V electronic control gears

Products

Sort by:
Product
Light color (designation)
Color temperature
Color rendering index Ra
Luminous flux per meter
Nominal wattage per meter
Data sheet
LF1200-G3-820-09 L2
2000 K 2000 K >80 1000 lm 10.6 W
LF1200-G3-824-09 L2
2400 K 2400 K >80 1200 lm 10.6 W
LF1200-G3-827-09 L2
2700 K 2700 K >80 1200 lm 8.9 W
LF1200-G3-830-09 L2
3000 K 3000 K >80 1200 lm 8.9 W
LF1200-G3-840-09 L2
4000 K 4000 K >80 1200 lm 8.1 W
LF1200-G3-850-09 L2
5000 K 5000 K >80 1200 lm 8.1 W
LF1200-G3-865-09 L2
6500 K 6500 K >80 1200 lm 8.1 W
LF2000-G3-824-04 L1
2400 K 2400 K >80 2000 lm 17.9 W
LF2000-G3-827-04 L1
2700 K 2700 K >80 2000 lm 15.0 W
LF2000-G3-830-04 L1
3000 K 3000 K >80 2000 lm 15.0 W
LF2000-G3-840-04 L1
4000 K 4000 K >80 2000 lm 13.6 W
LF2000-G3-850-04 L1
5000 K 5000 K >80 2000 lm 13.6 W
LF2000-G3-865-04 L1
6500 K 6500 K >80 2000 lm 13.6 W
LF3000-G3-827-03 L1
2700 K 2700 K >80 3000 lm 23.7 W
LF3000-G3-830-03 L1
3000 K 3000 K >80 3000 lm 23.7 W
LF3000-G3-840-03 L1
4000 K 4000 K >80 3000 lm 21.8 W
LF3000-G3-850-03 L1
5000 K 5000 K >80 3000 lm 21.8 W
LF3000-G3-865-03 L1
6500 K 6500 K >80 3000 lm 21.8 W
LF4000-G3-827-03 L1
2700 K 2700 K >80 3750 lm 28.9 W
LF4000-G3-830-03 L1
3000 K 3000 K >80 3750 lm 28.9 W
LF4000-G3-840-03 L1
4000 K 4000 K >80 3850 lm 28.9 W
LF4000-G3-850-03 L1
5000 K 5000 K >80 3850 lm 28.9 W
LF4000-G3-865-03 L1
6500 K 6500 K >80 3850 lm 28.9 W
LF1200-G3-927-09 L2
2700 K 2700 K >90 1100 lm 10.6 W
LF1200-G3-930-09 L2
3000 K 3000 K >90 1200 lm 10.6 W
LF1200-G3-940-09 L2
4000 K 4000 K >90 1200 lm 10.0 W
LF2000-G3-927-04 L1
2700 K 2700 K >90 1800 lm 17.9 W
LF2000-G3-930-04 L1
3000 K 3000 K >90 2000 lm 17.9 W
LF2000-G3-940-04 L1
4000 K 4000 K >90 2000 lm 16.3 W
LF3000-G3-940-03 L1
4000 K 4000 K >90 3000 lm 26.5 W
LF1200-G3-SW30-09 L2
3000 K 3000 K >90 1200 lm 10.0 W
LF1200-G3-SW40-09 L2
4000 K 4000 K >90 1200 lm 10.0 W
LF2000-G3-SW30-04 L1
3000 K 3000 K >90 2000 lm 17.9 W
LF2000-G3-SW40-04 L1
4000 K 4000 K >90 2000 lm 17.9 W
LF3000-G3-SW30-03 L1
3000 K 3000 K >90 3000 lm 27.6 W
LF3000-G3-SW40-03 L1
4000 K 4000 K >90 3000 lm 27.6 W

Information about Family

Areas of application
  • Cove lighting
  • Ceiling integration
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Downloads

Tools