LFP200M-G3-BL-06

Product family benefits
  • Large selection of light colors
  • Great design freedom thanks to flexibility and cuttability of module
  • High-performance silicone for extremely long life and flexibility
  • Simple connection thanks to premounted connectors
  • Extraordinary design and high quality materials
  • Toolless connection with the optional CONNECTsystem
  • Easy mounting on many smooth surfaces thanks to self-adhesive tape at the back
Areas of application
  • Decorative applications
  • Wall integration
  • Backlighting of complex structures
  • Path lighting
  • Signage
  • Suitable for outdoor use
Equipment / Accessories
  • Simplified connection with optional matching CONNECTsystem
  • Quick installation with optional SLIM TRACK System
  • Perfectly matched to OPTOTRONIC 24 V electronic control gears
484426_Tonne-de

Technical Data

Electrical data

Nominal voltage

24.0 V

Type of current

DC

Nominal wattage per meter

4.1 W

Rated wattage

24.50 W

Input voltage range

23…25 V

Accidental reverse input voltage protection up to

25 V

Photometrical data

Light color LED

Blue

Nominal dominant wavelength

467 nm

Luminous flux per meter

48 lm

Total useful luminous flux

290 lm

Luminous efficacy

12 lm/W

For white color

Light color (designation)

Blue

Light technical data

LED pitch

30.0 mm

Beam angle

120 °

Rated beam angle (half peak value)

120.00 °

Starting time

< 0.5 s

Warm-up time (60 %)

0.00 s

LED module information

Number of LEDs per meter

33

Number of LEDs per smallest unit

5

Maximum operable length

6000 mm

Max. cumulative product length powering it from a single end

Dimensions & weight

Length

6000 mm

LED pitch 30 mm

Length – smallest unit

150.0 mm

Width

11.0 mm

Height

4.5 mm

without tape

Cable length

500.0

Product weight

390.00 g

Cable cross-section, input side

0.34 mm²

Colors & materials

Cover material

Silicone

Body material

Silicone

Temperatures & operating conditions

Performance temp. acc. to IEC 62717

35 °C

Temperature range in operation at Tc point

-20…70 °C

At the Tc point

Ambient temperature range

-20…+50 °C

Rated ambient temp. 25°C/Providing that temperature at Tc point is below max value during operation/Temperature ramping for environmental testing acc. to IEC 62717, 1K/min

Temperature range at storage

-40…+85 °C

Lifespan

Rated lamp life time

50000 h

L70/B50 at Tc 40 °C

Nominal lamp life time

50000 h

Additional product data

Predecessor EAN

4008321616913

Capabilities

Lowest bending radius

50 mm

Certificates & standards

Energy consumption

27 kWh/1000h

Standards

CE/EAC/UL Recognized component according UL 8750

Type of protection

IP67

Logistical data

Commodity code

940542319000

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

18-04-2022

Primary Article Identifier

4052899500525

Declaration No. in SCIP database

In work

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899500525 FS

Folding box

1 353mm x 349mm x 32mm 970.00g 3.94dm³
4052899500532 VS

Shipping box

8 365mm x 286mm x 366mm 7338.00g 38.21dm³

Downloads

Tools

Information about Family

Inject a shot of light into your unique lighting design, with LINEARlight FLEX Protect ECO. Giving dimmable, consistent light of luminous flux up to 155 lm/m, resistant to salt mist and UV and protected to IP67, this flexible, cuttable strip of LEDs can be used outside or inside. If you are a lighting designer, light planner or architect, its innovative design, build quality and ease of use give you great design freedom, and it is particularly good for wall integration, LED backlighting of complex structures, path lighting, signage and other decorative applications. Available in various color temperatures, LINEARlight FLEX Protect ECO is made of high quality silicone to ensure long life and flexibility. Often, the adhesive strip on the back is all you need to fix it in place, while units can be connected without tools with the optional CONNECTsystem.
Product family features
  • Flexible and cuttable LED strip
  • Luminous flux: up to 200 lm/m
  • Type of protection: IP67
  • Dimmable with PWM technology
  • Fine White (3.5 SDCM)
  • Salt mist proof
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015. The contained light source is intended for use in applications requiring high-quality coloured light.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Light color (designation)
Luminous flux per meter
Nominal wattage per meter
Data sheet
LFP200M-G3-BL-06
Blue 48 lm 4.1 W
LFP200M-G3-RE-06
Red 140 lm 6.0 W
LFP200M-G3-GR-06
Green 157 lm 4.1 W
LFP200M-G3-YE-06
Yellow 140 lm 6.0 W