Lightbar MX140-SP  

LED auxiliary lights enhance driving pleasure

When it comes to road traffic, safety can’t be emphasized enough. Risks from inadequate street lighting and wild animals are very high, particularly on rural and dirt roads. The LEDriving Lightbar MX140-SP is a LED auxiliary light approved for use on roads that improves road safety with more light.
Equipped with three high-performance LEDs, the LED high beam improves visibility for drivers even in difficult driving conditions. With an angle of ten degrees, the beam of light can reach up to 200 meters.
The automotive auxiliary light can be used in two ways: as an auxiliary high beam and as a frontal position light. Both options are fully ECE-compliant.
The sophisticated reflector design of the LED auxiliary light provides very high optical efficiency with uniform light distribution. The design also keeps the light from blinding oncoming traffic.

Durability thanks to robust materials
During regular use, the LEDriving Lightbar MX140-SP has to withstand quite a bit. The search light therefore comes equipped with a hard-wearing polycarbonate lens that meets the highest standards.
An integrated driver and thermal management system not only protects the high performance LEDs from uncontrolled overheating, it also contributes to a longer lifespan for the LED working light overall. Over and under voltage protection automatically breaks the circuit when power exceeds the predetermined current for a specified amount of time.

Safer driving on-road and off-road
The safety aspect plays a major role, and not only in traffic. Thanks to its increased brightness, the LED light improves safety even in off-road situations.
Bright light is critical on construction sites and for agricultural machines. The range of applications for the robust LED bar is therefore not limited to automotive uses. Utility and industrial vehicles also benefit from the powerful 2000 lumen LED auxiliary light.

Technical Data

Product information

Order reference

LEDDL102-SP

Application (Category and Product specific)

Additional high beam application

Electrical data

Nominal voltage

12/24 V

Nominal wattage

30 W

Test voltage

13.5 V

Photometrical data

Luminous flux

2000 lm

Color temperature

6000 K

Light distance at 1lx

200 m

Dimensions & weight

Width

73.0 mm

Height

86.0 mm

Length

140.0 mm

Product weight

730.00 g

Lifespan

Lifespan Tc

5000 h

Guarantee

5 years

Additional product data

Connector to lamp

DT Connector

Capabilities

Technology

LED

Certificates & standards

Standards

ECE R10, R112, R7

Approval marks – approval

E4 approval

Type of protection

IP67

Logistical data

Commodity code

851220009000

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899595293 FS

Folding box

1 152mm x 109mm x 107mm 800.00g 1.77dm³
4052899595309 VS

Shipping box

8 325mm x 240mm x 253mm 6865.00g 19.73dm³

Downloads

Tools

Information about Family

When it comes to road traffic, safety can’t be emphasized enough. Risks from inadequate street lighting and wild animals are very high, particularly on rural and dirt roads. The LEDriving Lightbar MX140-SP is a LED auxiliary light approved for use on roads that improves road safety with more light.
Equipped with three high-performance LEDs, the LED high beam improves visibility for drivers even in difficult driving conditions. With an angle of ten degrees, the beam of light can reach up to 200 meters.
The automotive auxiliary light can be used in two ways: as an auxiliary high beam and as a frontal position light. Both options are fully ECE-compliant.
The sophisticated reflector design of the LED auxiliary light provides very high optical efficiency with uniform light distribution. The design also keeps the light from blinding oncoming traffic.

Durability thanks to robust materials
During regular use, the LEDriving Lightbar MX140-SP has to withstand quite a bit. The search light therefore comes equipped with a hard-wearing polycarbonate lens that meets the highest standards.
An integrated driver and thermal management system not only protects the high performance LEDs from uncontrolled overheating, it also contributes to a longer lifespan for the LED working light overall. Over and under voltage protection automatically breaks the circuit when power exceeds the predetermined current for a specified amount of time.

Safer driving on-road and off-road
The safety aspect plays a major role, and not only in traffic. Thanks to its increased brightness, the LED light improves safety even in off-road situations.
Bright light is critical on construction sites and for agricultural machines. The range of applications for the robust LED bar is therefore not limited to automotive uses. Utility and industrial vehicles also benefit from the powerful 2000 lumen LED auxiliary light.