OT 60/220 240/1A4 1DIMA P7
Product family benefits
- Easy and fast wireless luminaire programming
- Very high efficiency
- High surge protection: up to 6 kV
- Great flexibility due to wide operating temperature range of -40 55 °C
- Optimized for AstroDIM operation
Areas of application
- Street and urban lighting
- Industry
Technical Data
Electrical data
Nominal voltage
220 240 V
Input voltage AC
198 264 V
Nominal current
0.30 A
Mains frequency
50 60 Hz
Power factor λ
> 0.97
Total harmonic distortion
< 10 %
Device power loss
8.0 W
Inrush current
52 A
Max. ECG no. on circuit breaker 10 A (B)
7
Max. ECG no. on circuit breaker 16 A (B)
11
Max. ECG no. on circuit breaker 25 A (B)
17
Surge capability (L/N-Ground)
10 kV
Surge capability (L-N)
6 kV
Nominal output power
60 W
Maximum output power
60 W
Efficiency in full-load
88 %
Nominal output current
700 1400 mA
Output current tolerance
±5 %
Output ripple current (100 Hz)
< 5 %
Minimum output current
400 mA
Galvanic isolation
Double
Max. no. of ECGs on 16A MCB with EBN-OS
22
Nominal output voltage
43 86 V
Dimensions & weight
Length
138.0 mm
Width
82.4 mm
Height
38.0 mm
Mounting hole spacing, length
126.0 mm
Mounting hole spacing, width
52.0 mm
Product weight
540.00 g
Cable cross-section, input side
1.0 mm²
Cable cross-section, output side
1.0 mm²
Wire preparation length, input side
10 mm
Temperatures & operating conditions
Ambient temperature range
-40 +55 °C
Temperature range at storage
-25 85 °C
Maximum temperature at tc test point
85 °C
Max.housing temperature in case of fault
110 °C
Permitted rel. humidity during operation
5 85 %
Lifespan
ECG lifetime
50000 / 100000 h
Capabilities
Dimmable
Yes
Dimming interface
AstroDIM
Dimming range
25 100 %
Suitable for fixtures with prot. class
I / II
Constant lumen function
Yes
Short-circuit protection
Yes
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Number of channels
1
Programming
Programming device
NFC
Certificates & standards
Type of protection
IP67
Standards
Acc. to EN 60598-1/Acc. to EN 61347-1/Acc. to EN 61547
Approval marks approval
CCC / CE / ENEC
Logistical data
Commodity code
850440839000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
19-05-2023
Primary Article Identifier
4052899495012 | 4062172040525 | 4050732430886 | 8010703806023
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
326c063f-1082-457d-98d3-d58b34361970 | 09b01a83-72bc-4807-b2c3-82f614be2f1d
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
---|---|---|---|---|---|
4052899495012 |
UNV
| 1 | 138mm x 82mm x 38mm | 540.00g | 0.43dm³ |
4052899495029 |
VS
| 20 | 519mm x 273mm x 228mm | 12325.00g | 32.30dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
Product family features
- Supply voltage: 220 240 V
- Available with output current range: up to 1,400 mA
- AstroDIM for autonomous dimming with five independent levels (astro, time mode)
- Constant Lumen Output (CLO)
- IP rating: IP67 with independent installation
- Overtemperature protection
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
Data sheet | ||
---|---|---|---|---|---|---|---|
![]() |
OT 60/220
240/1A4 1DIMA P7
|
700 1400 mA | 138.0 mm | 82.4 mm | 38.0 mm | ||
![]() |
OT 100/220
240/1A4 1DIMA P7
|
700 1400 mA | 172.6 mm | 68.5 mm | 38.6 mm | ||
![]() |
OT 150/220
240/1A4 1DIMA P7
|
700 1400 mA | 212.6 mm | 68.5 mm | 38.6 mm | ||
![]() |
OT 200/220
240/1A4 1DIMA P7
|
700 1400 mA | 227.6 mm | 68.5 mm | 38.6 mm |