Product family features
  • Available with different wattage: 40 W, 60 W, 90 W, 165 W
  • Input voltage: 120…277 V (40 W), 220…240 V (60 W, 90 W, 165 W)
  • Current output range: 70…1,050 mA
  • Flexible current setting with one additional wire (LEDset2)
  • AstroDIM for autonomous dimming with five independent levels (astro, time mode)
  • Allows for energy saving in twilight phases
  • MainsDIM function for dimming via reduction of line voltage amplitude
  • Isolated DALI interface for bidirectional telemanagement systems
  • Standby power consumption: < 0.5 W
  • Constant Lumen Output (CLO)
  • Overtemperature protection via external NTC
Product family benefits
  • 4DIM functionality in one device (StepDIM, AstroDIM, MainsDIM, DALI)
  • Very high efficiency
  • High surge protection: up to 10 kV (1 pulse) / 8 kV, in protection class I or II
  • Low luminous efficacy tolerance through low output current tolerance of ± 3 %
  • Great flexibility due to wide operating temperature range of -40…55 °C or 60 °C
  • Protection through double isolation between mains input and LED output
Equipment / Accessories
  • DALI magic hardware for configuring 4DIM ECGs necessary
  • Programmable via Tuner4TRONIC software

Information about Family

This programmable constant current LED power supply brings you lots of functionality and options in one product family. Available in a choice of wattage (40 W, 60 W, 90 W, 165 W) and input voltages, it is ideal for street lighting, urban and industrial lighting. You can use it in luminaires of protection classes I and II, and outside in luminaires with protection of IP54 or greater. You get a choice of 4 dimming capabilities including DALI, constant lumen function and overtemperature protection via external NTC. If programmable, dimmable light is what you need, then look no further.
Areas of application
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP > 54
  • Suitable for use in outdoor luminaires of protection class I and II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.