OT DX 110/220…240/1A0 DIMA LT2 E
.jpg)
.jpg)
.jpg)
.jpg)
Product family benefits
- Zhaga Book18 compliant and D4i certified incl. Parts 25x + AUX
- Electrical interface and data communication fully based on open standards
- Fully programmable via software (DALI Interface, NFC)
- Low luminous efficacy tolerance through low output current tolerance of ± 3 %
- High surge protection: up to 10 kV (1 pulse) in protection class I or II
- Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
- Mains input undervoltage protection
- Very high efficiency
- Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application
- Street and urban lighting
- Industry
- Suitable for outdoor applications in luminaires with IP > 54
- Suitable for use in outdoor luminaires of protection class I and II
Technical Data
Electrical data
Nominal voltage
220…240 V
Input voltage AC
198…264 V
Input voltage DC
176…276 V
Nominal current
0.53 A
Mains frequency
0/50/60 Hz
Power factor λ
0.73C...0.99
Total harmonic distortion
< 10 %
Device power loss
8.0 W
Inrush current
65 A
Max. ECG no. on circuit breaker 10 A (B)
7
Max. ECG no. on circuit breaker 16 A (B)
12
Max. ECG no. on circuit breaker 25 A (B)
19
Surge capability (L/N-Ground)
10 kV
Surge capability (L-N)
6 kV
Nominal output power
110 W
Maximum output power
110 W
Efficiency in full-load
93 %
Nominal output current
200…1050 mA
Default output current
700 mA
Output current tolerance
±3 %
Output ripple current (100 Hz)
10 %
Minimum output current
70 mA
Galvanic isolation
Double
Nominal input voltage (SD port)
220…240 V
Output current LEDset open
70 mA
Auxiliary Power Supply
24 V
Output current LEDset shorted
Not allowed
Nominal output voltage
75…220 V
U-OUT (working voltage)
250 V
Dimensions & weight
Length
170.0 mm
Width
100.0 mm
Height
40.0 mm
Mounting hole spacing, length
160.0 mm
Mounting hole spacing, width
90.0 mm
Product weight
998.00 g
Cable cross-section, input side
0.2…1.5 mm²
Cable cross-section, output side
0.2…1.5 mm²
Wire preparation length, input side
8.5…9.5 mm
Temperatures & operating conditions
Ambient temperature range
-40…+60 °C
Temperature range at storage
-25…85 °C
Maximum temperature at tc test point
85 °C
Max.housing temperature in case of fault
120 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
100000 h
ECG ambient temperature (ta) |
60 °C |
50 °C |
48 °C |
|---|---|---|---|
Temperature at the measuring point tc (°C) |
85 °C |
75 °C |
73 °C |
ECG lifespan (h) |
50000 h |
85000 h |
100000 h |
Capabilities
Dimmable
Yes
Dimming interface
AstroDIM / DALI/DEXAL/D4i / StepDIM
Dimming range
10…100 %
Suitable for fixtures with prot. class
I / II
Constant lumen function
Yes
NTC input
Yes
Short-circuit protection
Yes
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
DALI-2 Diagnostic Data
Yes
DALI-2 Energy Data
Yes
Overload protection
Yes
LEDset
Yes
Number of channels
1
Programming
Programming device
DALI / NFC
Tuner4TRONIC Field App
Yes
Tuner4TRONIC
Yes
Programmable features
Thermal Protection
Yes
Configuration Lock
Yes
DALI-2 Luminaire Data
Yes
Emergency Mode
Yes
AstroDIM
Yes
Driver Guard
Yes
StepDIM
Yes
Constant Lumen
Yes
Certificates & standards
Type of protection
IP20
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN 55015:2006 + A1:2007 + A2:2009/Acc. to EN 61547/Acc. to FCC 47 part 15 class B/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 62386-101/Acc. to IEC 62386-102/Acc. to IEC 62386-207/Acc. to IEC 62386-150/Acc. to IEC 62386-250/Acc. to IEC 62386-251, -252, -253
Approval marks – approval
CE / ENEC / VDE / VDE-EMC / CCC / EL / DALI-2 / D4i / RCM
Logistical data
Commodity code
850440839000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
06-03-2023
Primary Article Identifier
4052899999688 | 8010703806283
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
19d73c5f-0394-4c8d-83a3-b08d9b5acd81 | 18c187d6-d8b6-4789-a69d-4cdee97e228d
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4052899999688 |
UNV
| 1 | 170mm x 100mm x 40mm | 998.00g | 0.68dm³ |
| 4052899999725 |
VS
| 10 | 395mm x 148mm x 248mm | 10716.00g | 14.50dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
The future-proof way towards a smart city
The electrical interface and data communication of this driver is fully based on open standards. It shows a DEXAl interface with the DiiA standard -250 and is also ready for Zhaga Book 18 and DALI part 25x + AUX. The device is fully programmable via DALI interface and NFC.
The electrical interface and data communication of this driver is fully based on open standards. It shows a DEXAl interface with the DiiA standard -250 and is also ready for Zhaga Book 18 and DALI part 25x + AUX. The device is fully programmable via DALI interface and NFC.
Product family features
- DEXAL interface based on DALI-2 communication
- Available with different wattage: 40 W, 75 W, 110 W, 165 W
- Current output range: 70…1,050 mA
- AstroDIM for autonomous dimming with five independent levels (astro, time mode)
- Standby power consumption: < 0.5 W
- Integrated customizable thermal management (Driver Guard)
- Constant Lumen Output (CLO)
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|
|
OT DX 40/220…240/1A0 DIMA LT2 E
|
200…1050 mA | 133.0 mm | 77.0 mm | 40.0 mm | ||
|
OT DX 75/220…240/1A0 DIMA LT2 E
|
200…1050 mA | 150.0 mm | 90.0 mm | 40.0 mm | ||
|
|
OT DX 110/220…240/1A0 DIMA LT2 E
|
200…1050 mA | 170.0 mm | 100.0 mm | 40.0 mm | ||
|
OT DX 165/220…240/1A0 DIMA LT2 E
|
200…1050 mA | 170.0 mm | 100.0 mm | 40.0 mm |
