OT 200/220…240/5A6 P5
.jpg)
.jpg)
Product family benefits
- High surge protection: up to 6 kV
- High efficiency
- Adjustable and wide output current range
- Constant current output
- Protection through double isolation between primary and secondary side (SELV)
- IP rating: IP65
- Long lifetime: up to 100,000 h
Areas of application
- Independent installation
- Street and urban lighting
- Industry
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Nominal voltage
220…240 V
Input voltage AC
198…264 V
Nominal current
1 A
Mains frequency
50…60 Hz
Power factor λ
> 0.98/> 0.90
Total harmonic distortion
< 10 %
Device power loss
26 W
Inrush current
105 A
Max. ECG no. on circuit breaker 10 A (B)
3
Max. ECG no. on circuit breaker 16 A (B)
4
Max. ECG no. on circuit breaker 25 A (B)
6
Surge capability (L/N-Ground)
6 kV
Surge capability (L-N)
6 kV
Nominal output power
200 W
Maximum output power
200 W
Efficiency in full-load
91 %
Nominal output voltage
35…70 V
U-OUT (working voltage)
80 V
Nominal output current
2800…5600 mA
Output current tolerance
±5 %
Minimum output current
2 A
Galvanic isolation
double/reinforced
Dimensions & weight
Length
252.5 mm
Width
68.0 mm
Height
42.5 mm
Mounting hole spacing, length
241.6 mm
Product weight
1200.00 g
Cable cross-section, input side
1.0 mm²
Cable cross-section, output side
1.0 mm²
Wire preparation length, input side
10 mm
Temperatures & operating conditions
Ambient temperature range
-40…+50 °C
Temperature range at storage
-40…+85 °C
Maximum temperature at tc test point
85 °C
Max.housing temperature in case of fault
110 °C
Lifespan
ECG lifetime
50000 h
Temperature at the measuring point tc (°C) |
85 °C |
75 °C |
|---|---|---|
ECG lifespan (h) |
50000 h |
80000 h |
Capabilities
Dimmable
No
Suitable for fixtures with prot. class
I
Intended for no-load operation
No
Number of channels
1
Certificates & standards
Type of protection
IP65
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384
Approval marks – approval
CCC / CE / CB
Logistical data
Commodity code
850440839000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
14-04-2022
Primary Article Identifier
4052899410695
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Declaration No. in SCIP database
In work
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4052899410695 |
UNV
| 1 | 253mm x 68mm x 43mm | 1200.00g | 0.73dm³ |
| 4052899410701 |
VS
| 10 | 322mm x 292mm x 212mm | 12869.00g | 19.93dm³ |
Downloads
Data sheets
Information about Family
OPTOTRONIC Outdoor is a constant current LED power supply that offers an extensive lifespan and overtemperature protection. You can choose your preferred option from a range of wattages; the line voltage is 220…240 V. It permits current setting via potentiometer without programming, and is suitable for use with luminaires of protection class I. You can install this driver independently, and it is great for use in street lighting, urban and industrial lighting. Its benefits include high surge protection (up to 6 kV), an adjustable and wide output current range, protection given by double isolation between the primary and secondary sides (SELV) and high IP protection (IP65).
Product family features
- Overtemperature protection
- Available with different wattage: 100 W, 150 W, 200 W
- Line voltage: 220…240 V
- Current setting via potentiometer without programming
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|
|
OT 100/220…240/4A2 P5
|
2100…4200 mA | 212.5 mm | 68.0 mm | 42.5 mm | ||
|
OT 150/220…240/4A9 P5
|
2450…4900 mA | 242.5 mm | 68.0 mm | 42.5 mm | ||
|
|
OT 200/220…240/5A6 P5
|
2800…5600 mA | 252.5 mm | 68.0 mm | 42.5 mm |
